My Mistake... i reviewed my emails and overlooked the license plate holder/led light which is not on the list, because i had purchased it earlier thinking i was going to clean up my existing SG fender... part # not known but the part was $162 shipped...

 

For a $100 you can buy a Kuryaykin curved LED plate mount. Its a universal fit job. For $60 a pair vs $250 you can buy these lights too, from a street rod shop off ebay, yep LED also, brake, running, stop all in one. $20 from Autozone gets you the 5 wire to 4 trailer light converter. For $38 you can have a regular FLHX facia...with the slots for the lower light that the SERG doesn't have vs ??$160 SERG facia?? and last you can fit a 2009 fender for the 180 tire in a 2008 frame because we did it....twice. See my post previous post here from late last winter. https://www.hdforums.com/forum/touri...0-install.html

 

great savings, but I bet the harley led's are made in china and the ebay cheapos are only made in korea

 

unfortunately you are probably right leohd, lol.

 

Timberland. your set up looks reeeeal nice, for someone who already has a 09 or 10 sg or rg, ya can't beat it

 

Draggin' up a somewhat oldie here.

I just want the CVO Fascia and LED set-up. Do I need all the other part numbers to make it work on my '09? I was thinking just theses:

Fascia, RR Fender 60465-09
Envelope/ASY/LH/RED 69383-09
Envelope/ASY/RH/RED 69407-09
Wiring Harness 70338-09

Do I need the others to complete the fascia & LED set-up?

Stud Plate Assembly 59818-09
Stiffening Plate 60919-09
Nut, Flange, Cruise 7499
Screw 3152

Thanks

 

The other parts are for mounting the fascia/LED assemblies per HD's OEM installation. They're cheap compared to the costs of the other pieces, so I'd go with HD's installation. For example, the stud plates go through the corresponding holes in the fender for attaching the fascia on both sides of the fender. The stud plates have threaded studs to which the nuts are attached.

 

Cool, thanks. Just needed to make sure.

 

Here it is mocked up on my project and they surprisingly line up pretty good with the stock bags without any modification.

 

Inzane that look nice.

I finished mine last month; only thing now is to move the lic. plate mount. I'm going to use the kuryakyn curve plate.