1995 Flhtc 1340 need tips on setting timimg with H4 single fire ignition
#1
1995 Flhtc 1340 need tips on setting timimg with H4 single fire ignition
1995 FLHTC 1340 evo 10.5 compression S&S cam 585 S&S push rods S&S E carb single fire H4 Ignition ,20 over domed pistons.
Need advice on how to set the timing with the H4 advance as well where to set the timing marks at the nose cone .Have tried many different settings but it either pings or drags starter as timing to far advanced
either I get to much advance with pinging hard to start or retard the timing which really hurts the performance .
Any help with this would be appreciated.
Thanks
Waggs.
Need advice on how to set the timing with the H4 advance as well where to set the timing marks at the nose cone .Have tried many different settings but it either pings or drags starter as timing to far advanced
either I get to much advance with pinging hard to start or retard the timing which really hurts the performance .
Any help with this would be appreciated.
Thanks
Waggs.
Thread
Thread Starter
Forum
Replies
Last Post