I can't adjust the cable any more. I'm assuming I need to either turn out the adjuster screw at the jam nut either more or less to get the 'clutch zone' where I want it but not having any luck...
....well I just re-adjusted at the clutch adjuster nut. I turned it out only 1/2 of a turn and it's "better". It seems to be more in the "half way point" from the bar now.
What would make the clutch not be able to adjust like I want?
I could always adjust my Sporty's clutch exactly where I wanted but this bike seems to be different...
my clutch free play at the lever was randomly getting loose(way loose)then back to 1/8" normal play today. Any one have an idea?
07 ,adjusted clutch at derby once and it was fine at 10k now has 17k on board. Had to adjust cable twice over 17k but now its like got a mind of its own wtf
If I don't tighten mine down to where it almost touches the perch, it rattles like crazy. I have to keep it tighter than recommended.
There is an anti-rattle clip, plastic half moon thing that is attached to the clutch lever inside the perch. You need to replace that to stop your rattle then adjust the cable to the proper spec.