Chubbys WO 517 R/K
#1
#2
#3
bars
Had the 508"s and they sat a little to low and the throttle cables kept touching the top of the Gas tank when turned to the right, trying to get away from that. and yeh they were like a wheelbarrel, kept geting my ***** busted saying they couldn't pass me because the bars were so wide.
#4
I am in the same boat... have 513's, and am thinking about 517's or 502's... please let me know if you find out any more about this. I am curious as to the hand position on the 517..... wish it was easier to check these things out! Best of luck with it.... Andrew
#6
#7
Im 6'1". Have you set on a bike with them? To me they remind me of setting in my chair in my living room (its really comfortable). By that I mean my arms are about in the same position as they are when Im in my chair (riding down the highway in a straight line). When Im doing a real slow turn (which I dont do a lot of) and steering nearly all the way in either direction they are about 3 inches above my knees. I have apes on my softail and its not nearly as comfortable, if comfortable is what you want that is. For looks the apes are killer in my opinion.
Last edited by 1931jamesw; 07-01-2009 at 11:14 AM.
Trending Topics
#8
Im 6'1". Have you set on a bike with them? To me they remind me of setting in my chair in my living room (its really comfortable). By that I mean my arms are about in the same position as they are when Im in my chair (riding down the highway in a straight line). When Im doing a real slow turn (which I dont do a lot of) and steering nearly all the way in either direction they are about 3 inches above my knees. I have apes on my softail and its not nearly as comfortable, if comfortable is what you want that is. For looks the apes are killer in my opinion.
#9
When you ask if I have set with them... are you referring to the 518's or the 517's? Huge difference in width on those two. I don't think I would be opposed to a lower bar if they were closer, so this is one of those situations where I am going nuts because I can't just sit of different bikes that have the different bars. I could order all 3, and get my local wrench crazy with this stuff, but he is already calling me 'crazier than a **** house rat'... but screw it... he makes money off of all this stuff... so perhaps I will order all 3 and go from there!
#10
Not to hijack, but I have a set of 518's for sale here. Make an offer, they are just gathering dust. https://www.hdforums.com/forum/softa...nstriping.html
Thread
Thread Starter
Forum
Replies
Last Post