Hi folks,

I'm needing a way to get parts numbers for a few items on my '08 Ultra Classic. I thought my service manual would have the numbers, but no such luck.

Needed is as follows:

Primary Cover Gasket - Service Manual Page #6-3
(Figure 6-2, part 1)

Crankcase Gasket - Service Manual Page #6-4
(Figure 6-19, part 10)

Main Shaft Oil Seal - Service Manual Page #6-4
(Figure 6-19, part 1)

Inner Primary Sealing Fastners (5) - Service Manual #6-4
(Figure 6-19, part 5)

Shifter Shaft Seal and Washer - Service Manual Page #7-28
(Figure 7-58, part 1)

Starter Shaft to Primary "O"ring - Service Manual Page #5-2
(Figure 5-1, part 29)

If anyone has these part numbers, it would be really cool. Or if you have a web page where I can go look up the numbers, that would be great also.

Thanks for any help !

 

34901-07
34934-06
12052A
786A
37101-84B & 6497HW
27444-00Y

Numbered respectively. FWIW, if you have a shifter shaft seal issue the Cometic double lip shifter seal is superior to the HD

 

Dawg, you are da' man ! Thanks a bunch my friend !

 

BTW, this is basically to have on had as the final drive belt is changed out. I had a rock slip in and cut the belt, so gotta move the "world" to get the old one off and a new one on. Arrrggghhhh !

Thanks again Dawg for the help.

 

Ah, sounds fun. Don't forget to ziptie the tensioner prior to removing it also

 

Hey Dawg,

I had the belt part number and I can't find it now...... I'm loosing my mind.... can you give me that number also?

 

40024-07

 

God Bless you for the help. Good night and it's much appreciated.

 

Throwing this up for someones future reference as I couldn't find the actual part # anywhere, so called Cometic.

Just ordered the double lip P/N C9354 correlates to HD P/N 37101-84 or 37101-84B . (2012 Ultra for me)
-

 

Old post I know....doing some work so digging thru old posts.

Curiuos, where did you get 6497HW from? I don't see it in my parts manual nor online? All I see is the 'retaining ring'?