How to Identify Stage II Tuner kit after it's installed?
#1
How to Identify Stage II Tuner kit after it's installed?
I won my 2008 FLHTCU in a raffle last year. I was told that it had a Stage II Tuner kit installed on it among other mods. Is there a way to identify that this mod has actually been done without tearing apart the motor? Other than the Rinehart Pipes and a Screamin Eagle Race Tuner CD and programmer I can't tell that anything has been changed. Are there any external marks that I could use to verify the mods?
Thanks!
James
Thanks!
James
#2
No external way to tell. You should, however, be able to see that the black backing plate of the air cleaner should be off and it will be open as it should have the SE round air cleaner. You can take the SERT and plug it into a computer and hook it up to the bike and see what the ECM has for a map (should coincide with your setup). Did you win it from a dealer, or did an organization buy it from a dealer set up that way for the raffle purpose? If so, PM me your VIN# and I can run it and the SWR warranty information should list all the parts covered under the warranty and that will show the components.
#3
Hmmm... It still has an oval air cleaner that says 96 cubic inches on it, which is what kinda started the suspicions after looking at the kits online. I will borrow a laptop to plug into, mine is vista and the disc says only XP, win2k, etc.
I won it at a company's 50th anniversary party. They said the dealership they bought it from did all the mods. I'll PM you the VIN.
Thanks Dawg!
ETA: I just checked, the stock air cleaner backing plate is gone and is an open element other than the oval cover.
I won it at a company's 50th anniversary party. They said the dealership they bought it from did all the mods. I'll PM you the VIN.
Thanks Dawg!
ETA: I just checked, the stock air cleaner backing plate is gone and is an open element other than the oval cover.
Last edited by SnorkelFLHTCU; 05-28-2009 at 06:46 AM.
#4
You can look at the push rod tunes under/behind the air cleaner. If they used an adjustable push rod kit, the tubes will slpit at differn't heights than the stock ones. Run to the dealer and measure the length of the tube from the bottom to the part that the tube splits, (the little cap deal). The S.E. air cleaner kit retains the stock "football" style cover, if it has a stage one filter, there will not be a black plastic cover behind the chrome football. Trust me, you'll know if it's there. If you can feel in behind the chrome cover you have the stage one filter. The black plastic cover is pretty restrictive and only lets air in through a coupl've holes in the front side of it.
#6
Hmmm...
I won my 2008 FLHTCU in a raffle last year. I was told that it had a Stage II Tuner kit installed on it among other mods. Is there a way to identify that this mod has actually been done without tearing apart the motor? Other than the Rinehart Pipes and a Screamin Eagle Race Tuner CD and programmer I can't tell that anything has been changed. Are there any external marks that I could use to verify the mods?
Thanks!
James
Thanks!
James
#7
James
Trending Topics
#8
#10
Thread
Thread Starter
Forum
Replies
Last Post