2009 RKC and 4 pint docking. CAUTION!!!
#11
I installed 4 point docking hardware on my bike. It is a 2009 rkc. this is and advice to all riders who has same bike: be carefull when you open your leather bags, theres one screw on the 4 point docking hardware that scratshes the leather everytime you open the bag. the leather on my bags is starting to peel because of this screw and bike has only 6 moths.
It is a shame HD cant do something right!
just be carefull when you open the lid
It is a shame HD cant do something right!
just be carefull when you open the lid
I bought the kit when I bought my 4-point docking harness. Because I also bought the cover kit for the docking harness, I just used the bushings and didn't use the stops.
#12
it is not the mount, it is one of the screws that holds the hardware to the rear fender.
3 screws on each side holds the 4 point docking hardware to the rear fender, well, it is the first screw (the closest to the seat) the one that scratches the lid of the bag if you full open it. the problems is not with the docking points so you dont need to buy the chrome magnetic covers if you dont want to.
http://www.harley-davidson.com/gma/g...bmLocale=en_US
see the picture on that link and it is the first screw from the right on the bottom
3 screws on each side holds the 4 point docking hardware to the rear fender, well, it is the first screw (the closest to the seat) the one that scratches the lid of the bag if you full open it. the problems is not with the docking points so you dont need to buy the chrome magnetic covers if you dont want to.
http://www.harley-davidson.com/gma/g...bmLocale=en_US
see the picture on that link and it is the first screw from the right on the bottom
The protective caps cured the problem
#14
#15
#16
it is not the mount, it is one of the screws that holds the hardware to the rear fender.
3 screws on each side holds the 4 point docking hardware to the rear fender, well, it is the first screw (the closest to the seat) the one that scratches the lid of the bag if you full open it. the problems is not with the docking points so you dont need to buy the chrome magnetic covers if you dont want to.
http://www.harley-davidson.com/gma/g...bmLocale=en_US
see the picture on that link and it is the first screw from the right on the bottom
3 screws on each side holds the 4 point docking hardware to the rear fender, well, it is the first screw (the closest to the seat) the one that scratches the lid of the bag if you full open it. the problems is not with the docking points so you dont need to buy the chrome magnetic covers if you dont want to.
http://www.harley-davidson.com/gma/g...bmLocale=en_US
see the picture on that link and it is the first screw from the right on the bottom
Last edited by BlackFLHR; 05-15-2009 at 04:34 PM.
#17
I installed the Kit on my bike last night at midnight but did not put the bags back on yet cause I want to clean them today after work. I cant tell from the little diagram provided where in the heck the piece of 3m tape is supposed to go.
I am glad yours are hitting on the SG. Anybody else get the same results?
#18
I installed the Kit on my bike last night at midnight but did not put the bags back on yet cause I want to clean them today after work. I cant tell from the little diagram provided where in the heck the piece of 3m tape is supposed to go.
I am glad yours are hitting on the SG. Anybody else get the same results?
I am glad yours are hitting on the SG. Anybody else get the same results?
From the post above it appears that maybe this only applies to the RKC but I didn't read that in the instructions.
#20
I can get that part number for you when I get home. I have it in my folder of documents on my modifications to the bike. It is a new part and not listed in the catalog yet.