Hello!

The rear cylinder exhaust mount that is held with the 2 starter bolts was discarded. Really cleaned up behind the rear cylinder.

Perry

 

Oops! I was thinking trans mount! Are you referring to the mount that utilizes the p-clamp to hold the factory exhaust? If so then it stays because the Rinehart will also use a p-clamp in the same location.

Perry

 

The other real nice feature is that the pipe has the oxygen sensor bung already installed. You might ask what good is that? When you run the new Terry Component Terminal Velocity, the unit requires a oxygen sensor and Bub worked with Terry to do that! Sure saves alot of grief installing one.

Perry

 

If your talking about the exhaust bracket that the left side mounted to, yes I took it off...

 

Nice looking exhaust[sm=smiley20.gif]

 

I am another 06 SGlider looking for just the right exhaust. Everything I hear about some of these 2 into 1's is great as far as sound and performance goes, but nobody seems to show any left side pictures. Personally, I love the look of duals from the left side and my feeling is that a 2 into 1 on a bagger would look like something is missing on the left. Even the true dual pics posted are mostly from the right side. I'd like to see the T-Rex from the left side. Does it stick out a bit further like Rineharts?

Anybody have any 2 into 1 left side shots? Thanks a hundred.

06 Vivid Blk SG stock except some geezer stuff like chopped tour pack and passing lamps.

 

Topper has some pictures of his.

https://www.hdforums.com/albumphoto....Type=1&apage=1

 

Sweet pipe, 2-1 pipes are great, unbeatable sound and performance.

 

Here is a better pic!

 

Hello!

Here is a picture of the Force Motor Products Air Intake I installed this afternoon.

Perry