IAMSWUTIAMS and marsh, oinker02 has it correct. hit control+f after you have everything hooked up, then check the rev extend 6200 box and hit ok. that sets the rev extend up. By the way don't hit the " run app" or whatever it is called box, or it will tell you there is an error. Did mine today and going for a ride this weekend....
I think the older units need a firmware update in order to apply this feature though. When they first came out with it you had to "purchase" the ability to have the rev extender. Now the newer units its native, just needs to be activated.
hdrider2002 you are correct about the update. The customer service rep said if you hit ctrl+f and then click ok, then that was all there was to it. I guess if its and older one, and it does not have the capability, then it will give you an error popup. I bought my pcIII in 06, and the upgrade seemed to take!?
I mainly know this because back when i first did my stage 1, i was going to either do the download or a pcIII, the "deciding factor" for me was the fact that the download increased the redline, while i couldn't do that with the PC111. Now that i have a PC111 with that cabaility, i'm much happier