Thank you everyone for you great response. After reveiwing several of the web site suggested and had the apportunity to look over each design I decided to build one and put some of my machining tools to use since several of the design are basically the same and the material required I have laying around beside the heim joint rod ends.
I'll post the result when I am done.
RK I am in the middle of doing the same thing as you, there is just enough info on the web to assertain most of the diminsions. I am making mine as a cross between bagger brace and throttle up. the dog bone is the hardest to do, I used multi folds of tin foil shoved up in the brace to make a pattern I used a tranny gasket for my hole patern on the tranny I am gong to dry fit my pieces tommorow.
03-06-2009 | 09:21 PM
