Just a thought. I had a HD stainless one from my sporty and sense my Dyna only needed a 5" one I got some 5/16 24 all thread to make a custom one.
Well it turns out that the Hiem joints from the HD custom one were not 5/16, they were 8mm fine thread. Very close in size but would not go on the allthread more than 4-5 turns.
Check your spares. I would hate for somebody to have the piece of mind and find out in BFE that they don't work.
Well it turns out that the Hiem joints from the HD custom one were not 5/16, they were 8mm fine thread. Very close in size but would not go on the allthread more than 4-5 turns.
they are 5/16 - 24, right handed thread. if you are reusing your original shifting rod.