Wow! you guys are good.

Can a SERG fascia be use on the RG (RLH) fender? I was wondering if there are holes on the side of SERG fender for the fascia lights than aren't on the RG fender.

Also, can new fascia be painted than attached to the old fender, or is it better to paint them assembled?

Beary

 

I've been told by a couple of dealers up north here that the rear end is a SE restricted item. Not sure if there is a way around it but they're not even willing to look into ways to get one.

 

beary....If your bike is a 09 and the fender is the same 9" width as either the SERG or FLHX, and the profile is the same. Either facia will work. 3 bolts on each side hold the facia's on. Some have placed 3m double sided tape on the facia to attach to the fender, its only plastic. You wont want to do it with tape with the SERG facia, it would be too heavy with the lights. You paint the facia then install, or if you want the standard FLHX colors you can buy them pre painted....check out Chicago harleys web site. When you type in the pn# of the FLHX part I listed...its primer, then they list other available colors and prices.

scooby doo...
The parts I listed are NOT limited...go to Zanotti or Chicago harleys web site and type the pn #'s I listed. The LIMITED parts are special paint colors or emblems. The pn#s are for the primer color. Scooby, pm me your credit card # and a letter of authorization to use it and I'll send you a picture in a few weeks of what the parts look like. LOL...or if you prefer I'll send you my mailing address and you place that in the "ship to" line and you keep your cc#.

 

did anyone Finnish this project?

 

Anybody finish this? I'd like to stick that SERG fender, fascia, and lights on the back of my RG... If someone has done it, throw up some pics and opinions!