103 Big bore kit
#62
#64
Hey Mark welcome to the forum from centeral Texas.
We will all be more than happy to help you spend your
money. Here check this out
http://www.harley-davidson.com/en_US...bmLocale=en_US
and be sure to look at the SE 254e cams
page 71 of 97 the only cam better than
the SE 255 cams.
We will all be more than happy to help you spend your
money. Here check this out
http://www.harley-davidson.com/en_US...bmLocale=en_US
and be sure to look at the SE 254e cams
page 71 of 97 the only cam better than
the SE 255 cams.
#67
Anyone experiencing hard starting when hot? I have 103" stage II with dealer download. Cold it spins over easily but when fully hot it really labors like the starter is going to hemorrhage. Feels too far advanced. Anyone else experience this and if so, what did you do about it?
Thanks,
Marc
Thanks,
Marc
#68
I'll throw my hat into the mix as well. I have a 96" 2010 streetglide with SE 204 cams, a se tuner, V&H's power duals with 4.5" twin slash ovals and a SE Heavy Breather. My bike makes 90hp and 102tq, if you want to pull it in a crazy 6th gear pull it will do 92hp and 104tq. If I had a 103" motor I personally would't use the 255's because I like some mid range as well so I would still use the SE204's. This cam has great bottom end and is very good up top as well. JMO.