Muffler Clamp - V&H Basic Slip Ons
10-30-2008 | 10:27 PM
Thread Starter
|
Road Captain
Joined: Jun 2008
Posts: 578
Likes: 0
From: Florida Gulf Coast
Quote:
Originally Posted by
dagnabit9
I didn't like the V&H clamps even when they were new! A pair of used HD clamps I had laying around worked MUCH better. My advice for all those doing the slip-on thang - ditch the clamps that came with them and use a new set from HD and you won't have any problems.
Bought a new set of HD clamps and put them on. Works like a charm with no more issues. Thanks for the advice.
10-31-2008 | 06:05 AM
Joined: Oct 2006
Posts: 754
Likes: 7
From: Illinois
Glad your issue is resolved.
Ride safe
10-31-2008 | 08:39 AM
Joined: Sep 2008
Posts: 109
Likes: 0
From: Rolla, Mo
Question for all of you that have already been through this:
Providing that they're fairly new, is it possible to reuse the stock harley clamps when installing the V&H slipons?
Bryon
10-31-2008 | 10:02 AM
Thread Starter
|
Road Captain
Joined: Jun 2008
Posts: 578
Likes: 0
From: Florida Gulf Coast
Quote:
Originally Posted by
BDHE
Question for all of you that have already been through this:
Providing that they're fairly new, is it possible to reuse the stock harley clamps when installing the V&H slipons?
Bryon
I guess you could, but I only spent $14 on the two at the dealership. Suprisingly they were not that expensive.
10-31-2008 | 11:22 AM
Joined: Dec 2006
Posts: 1,406
Likes: 1
From: long beach california
HAD same problem left side slipping loose put a set screw under saddlebag mount never moved again.
10-31-2008 | 11:23 AM
Joined: Apr 2006
Posts: 1,469
Likes: 0
From: 310
Quote:
Originally Posted by
BDHE
Question for all of you that have already been through this:
Providing that they're fairly new, is it possible to reuse the stock harley clamps when installing the V&H slipons?
Bryon
My V&H MO came with new clamps. Did you not get new ones or were the slip ons used?
10-31-2008 | 02:41 PM
Thread Starter
|
Road Captain
Joined: Jun 2008
Posts: 578
Likes: 0
From: Florida Gulf Coast
Quote:
Originally Posted by
r8rs4lf
My V&H MO came with new clamps. Did you not get new ones or were the slip ons used?
The V&H clamps are crap. At least the ones I got were.
10-31-2008 | 02:45 PM
Joined: Apr 2006
Posts: 1,469
Likes: 0
From: 310
Quote:
Originally Posted by
tano01
The V&H clamps are crap. At least the ones I got were.
Really???? The ones I got looked just like the factory ones.
10-31-2008 | 03:33 PM
Joined: Sep 2008
Posts: 109
Likes: 0
From: Rolla, Mo
Quote:
Originally Posted by
r8rs4lf
My V&H MO came with new clamps. Did you not get new ones or were the slip ons used?
I haven't ordered the pipes yet, but have seen comments that the V&H clamps don't seem to work well. Once I get the monster ovals, I'm going to want to get them on right the first time - hence my question about reusing the stock HD clamps.
Bryon
10-31-2008 | 04:04 PM
Joined: Nov 2007
Posts: 667
Likes: 2
From: SoCal
Dealership installed my monster ovals. They used the V&H clamps. After reading this post I checked it out and they are tight. No issues.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
skos
Touring Models
11
05-10-2017 04:51 PM
TriGeezer
General Harley Davidson Chat
18
05-09-2015 06:28 PM
Hdbiker1450
Touring Models
15
10-06-2007 01:18 AM
Ricks07
Exhaust System Topics
13
11-09-2006 10:30 AM
2005UltraNC
Exhaust System Topics
9
09-19-2006 02:18 PM
clamp ,
clamps ,
difference ,
harley ,
king ,
muffler ,
ons ,
road ,
slip ,
slipons ,
torque ,
vh