Touring Models Touring Model Parts Only

axles

Thread Tools
 
Search this Thread
 
  #1  
Old 09-21-2008 | 11:19 PM
fathertime's Avatar
fathertime
Thread Starter
|
Road Master
Joined: Dec 2007
Posts: 1,147
Likes: 2
From: CHILLIWACK B.C CANADA: have a u.s shipping adress
Default axles

need a pair of axles for 02-07 touring bike 1" bearing size so i can put my 07 laced profile wheels on my new 08 flht
 
  #2  
Old 09-22-2008 | 08:57 AM
FastHarley's Avatar
FastHarley
Former Sponsor
Joined: Apr 2007
Posts: 5,360
Likes: 447
From: Davie, FL
Default Do you have ABS?

Do you have ABS? If you do, you might not be able to use these wheels as the hub on the left side has a groove in it. whether this is important or not I do not know just yet. If you do not have ABS than just buy R&R your 25mm bearings or just buy new 25mm bearings and wheel bearing spacers. This will work.
 
  #3  
Old 09-22-2008 | 09:35 AM
fathertime's Avatar
fathertime
Thread Starter
|
Road Master
Joined: Dec 2007
Posts: 1,147
Likes: 2
From: CHILLIWACK B.C CANADA: have a u.s shipping adress
Default

no abs on iether..i have taken the bearings out of both but not only is the inside diameter different they are different widths as well..just thought it would be iesier to chg axles?
 
  #4  
Old 09-22-2008 | 08:42 PM
FastHarley's Avatar
FastHarley
Former Sponsor
Joined: Apr 2007
Posts: 5,360
Likes: 447
From: Davie, FL
Default Just left message

Just left message a while ago on your e-Mail I have your answers
 
  #5  
Old 09-23-2008 | 01:53 PM
blueflht's Avatar
blueflht
Road Warrior
Joined: May 2008
Posts: 1,287
Likes: 3
From: murfreesboro tn.
Default

dont keep it a secret howard tell us!!!
 
  #6  
Old 09-23-2008 | 06:20 PM
FastHarley's Avatar
FastHarley
Former Sponsor
Joined: Apr 2007
Posts: 5,360
Likes: 447
From: Davie, FL
Default Call

He (fathertime) called me but I dropped the call. I was on my cell phone away from my desk. I could not call Canada on my cell. I dropped him a e-Mail and also called the number on caller ID from my desk on my cell. The number and phone he used was not his own and I made every effort to get back with him including this posting, phone call, e-Mail and private messaging through this site. Sorry to mislead you guys.
 
  #7  
Old 09-24-2008 | 06:29 PM
dgoodbmw's Avatar
dgoodbmw
Tourer
Joined: Jun 2006
Posts: 445
Likes: 33
From: irwin pa.
Default axles????

Lets assume you find 1" axles, how you gonna make them work with the ids bearing in the ids bucket? Im fighting the same mission as you, the best way is to buy the right kit from harley and change bearings and spacers. search on touring section and look for question on wheels/vs bearing kits, now on page 5 or 6 now. Read the response from DAWG and follow his more direction, its a great document and gives all the answers.
 
  #8  
Old 10-01-2008 | 11:23 PM
fathertime's Avatar
fathertime
Thread Starter
|
Road Master
Joined: Dec 2007
Posts: 1,147
Likes: 2
From: CHILLIWACK B.C CANADA: have a u.s shipping adress
Default

ok thanks .. on the front i ended up changing the bearings and spacers from the 08 wheel into the 07 laced and it worked out fine.. havn't done the rear as of yet..and didn't realize the ids would be a problem considering lots have retrofitted ids onto the 07's??
 
  #9  
Old 10-01-2008 | 11:28 PM
fathertime's Avatar
fathertime
Thread Starter
|
Road Master
Joined: Dec 2007
Posts: 1,147
Likes: 2
From: CHILLIWACK B.C CANADA: have a u.s shipping adress
Default

thanks for your help i wasn't trying to snub you in any way ..i just thought you were really busy and went ahead and changed the bearings and it worked out o.k..i appreciate any help..and i don't understand why the call display gave you a different number , iwas calling from my desk at work (work related) lol..if i run into problems on the rear i will call you o.k?
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GRWHD
Softail Models
4
05-09-2019 06:48 AM
Road Gliderman
Wheels/Tires
4
02-27-2019 09:30 PM
lhinaz71
Touring Models
11
08-26-2018 06:25 PM
Talldog
Touring Models
12
08-25-2013 04:31 PM
UPSGUY
Wheels/Tires
8
10-25-2010 07:58 PM



Quick Reply: axles



All times are GMT -5. The time now is 04:17 AM.