Friend just got a 2002 Electric Guide with a&nbsp\\;short windshield, which he would like to swap out.
He just got a full size shield from someone. When he went to swap the windshields, he said there wasn't any washers/bushings that were suppose to snug against the windshield, just the bolts.
Are these washer/bushings fairly common and used on most models or do they change every so many years?
My friend works out of town so I told him I would go by the dealer and pick up the missing&nbsp\\; 3 washer/bushings. Has anyone had to get these items?
Tom

 

There are 3 brass ferules that are on the inner fairing and 3 torx screws and washers that are on the front fairing.&nbsp\\;\\\\\\;&nbsp\\;\\\\\\;Windshield shouldn't matter.&nbsp\\;\\\\\\; There are no bushings.&nbsp\\;\\\\\\;&nbsp\\;\\\\\\;Don't overtighten the screws&nbsp\\;\\\\\\;or you'll spin the ferules that&nbsp\\;\\\\\\;are seated in the plastic on the inner fairing.
&nbsp\\;
Hardware is available at&nbsp\\;the dealers.
&nbsp\\;\\\\\\;
&nbsp\\;\\\\\\;
&nbsp\\;\\\\\\;

 

i went with chrome allens and washers better looking