New FHLTCU
#11
RE: New FHLTCU
Thanks for all the info. I am currently leaning towards the Fuelpak - appears to be the easiest and I'm not thinking my application calls for much more than that. But, before I make the leap, what about the SERT - overkill? I had initially ruled it out as it costs more, appears considerably more complicated (and, apparently, considerably more versatile) and I didn't think what I required demanded that degree of upgrade. Was/am I right or should the SERT be a valid consideration rather than the V&H?
#12
RE: New FHLTCU
Buy the SERT or the new Super Tuner if an '08. The difference in price is nominal as compared to the cost of the bike and all the crap we all hang off of them.
Much more versatile if you ever want to change components later. Also allows for rear cylinder tuning to cool it down. And any HD and most indys can tune it. There is no substitute for a good dyno tune on any bike. MAPS will get ya close but conditions vary. Optimize engine temp. and fuel mileage for your needs.
Congrats on the new scooter!!
"Shiny side up!"
U
Much more versatile if you ever want to change components later. Also allows for rear cylinder tuning to cool it down. And any HD and most indys can tune it. There is no substitute for a good dyno tune on any bike. MAPS will get ya close but conditions vary. Optimize engine temp. and fuel mileage for your needs.
Congrats on the new scooter!!
"Shiny side up!"
U
#13
#14
RE: New FHLTCU
Congratulations and welcome to the forum. I haven't been here but a couple of months myself and I've found a wealth of helpful tips and friendly advice. I'm pretty much in your type situation in life and have been fortunate enough to enjoy my '07 Ultra for the past year and 17,000 miles. The only changes I have made were a H-D Premium oil cooler, a K&N #1499 air filter, a pair of '06 H-D SE Performance Touring slip-ons, and just recently, the Nightrider O2 IED's. And since my 1,000 mile service, all Syn-3. Very pleased with fuel mileage (45 highway and 37 city averages) and sound, and (mostly)satisfied with performance.
#15
RE: New FHLTCU
ORIGINAL: avalauncher
Thanks for all the info. I am currently leaning towards the Fuelpak - appears to be the easiest and I'm not thinking my application calls for much more than that. But, before I make the leap, what about the SERT - overkill? I had initially ruled it out as it costs more, appears considerably more complicated (and, apparently, considerably more versatile) and I didn't think what I required demanded that degree of upgrade. Was/am I right or should the SERT be a valid consideration rather than the V&H?
Thanks for all the info. I am currently leaning towards the Fuelpak - appears to be the easiest and I'm not thinking my application calls for much more than that. But, before I make the leap, what about the SERT - overkill? I had initially ruled it out as it costs more, appears considerably more complicated (and, apparently, considerably more versatile) and I didn't think what I required demanded that degree of upgrade. Was/am I right or should the SERT be a valid consideration rather than the V&H?
#18
RE: New FHLTCU
Do the stage one upgrades, buy a SERT and get it dyno tuned by a good tuner. I finally got mine dyno'd, and the differance it made is unbelivable! The bike runs cooler, pulls hard and runs smoother than it ever had.I wishI had done it sooner!
It's your bike,Do what you can afford.
It's your bike,Do what you can afford.
#19
RE: New FHLTCU
Welcome
When I got my 07-SG the dealer insisted that i put as close to 1000 miles on the bike before changing anything.
To date I have done the following with very good results and reliability.
Syn-3 in all
SE Air Cleaner
Stage one re-map
SE 50-State legal slip-ons
Now my rationale. With you being in the Denver area. Because of the noise abatement issues I would only go with 50-State legal slip-ons. Because of the idiots with straight pipes and spastic throttle hands we are all going to have to be in compliance so why hassle with with future changes. The Stage One remap was just fine for cooling the bike, smoothing out the torque curve and matching the new intake. If your intent is to maintain a dependable bike with a little enhancement I would not do anything more.
The next plan in the order will be.
K & N filter and more chromethis spring.
At 25,000 miles 103 Stage two and Cam Kit.
When I got my 07-SG the dealer insisted that i put as close to 1000 miles on the bike before changing anything.
To date I have done the following with very good results and reliability.
Syn-3 in all
SE Air Cleaner
Stage one re-map
SE 50-State legal slip-ons
Now my rationale. With you being in the Denver area. Because of the noise abatement issues I would only go with 50-State legal slip-ons. Because of the idiots with straight pipes and spastic throttle hands we are all going to have to be in compliance so why hassle with with future changes. The Stage One remap was just fine for cooling the bike, smoothing out the torque curve and matching the new intake. If your intent is to maintain a dependable bike with a little enhancement I would not do anything more.
The next plan in the order will be.
K & N filter and more chromethis spring.
At 25,000 miles 103 Stage two and Cam Kit.
#20
RE: New FHLTCU
Question, what is the difference in audible volume between the stock pipes and the SE Performance Touring ones? When I got my springer in mid'nineties, the stock pipes were, as best as I recall, pretty quiet. Barely had the Harley sound. Well, the stock ones on this Ultra are seemingly louder, not sure how much louder I'd care for. But I do want the added performance of the SE's. So, just curious, is there much of a volume (in sound) difference?
Again, thanks in advance for any info.
Again, thanks in advance for any info.