Can I swap out my RG rear signal bar to SG one?
#1
Can I swap out my RG rear signal bar to SG one?
Now that I have added the streetglide fender trim to my RG, I want to relocate my license plate underneath the taillight. I want to keepthe stock bullet signals, so the Kuryakyn #3000conversion kit is out. Does anyone know if I can just get the SG rear turnsignal bar and bolt it up to my RG? This would solve my dilemma, and let me get the Kuryakyn #3163 curved license plate bracket that WILL bolt to the stock SG turnsignal bar.
I know about the JP Cycles bracket, but its flat and I prefer the curved one, but this may be my plan B.
Is there somewhere online I can find part #'s for the SG turnsignal bar?
I know about the JP Cycles bracket, but its flat and I prefer the curved one, but this may be my plan B.
Is there somewhere online I can find part #'s for the SG turnsignal bar?
#5
RE: Can I swap out my RG rear signal bar to SG one?
The SG "directional bar assembly" PN is 68629-05--this is the chrome part that includes the turn signals, license plate light, etc.--no license plate frame, turn signal lenses, tail lamp lens, etc.--just the chrome piece. This PN is from the rear turn signal & license plate relocation kit, PN 53702-04--it's what I used to replicate the SG fender/facia/LED and license plate below the tail light when I did the mod a couple of years ago.
#7
RE: Can I swap out my RG rear signal bar to SG one?
ORIGINAL: Harleypingman
The SG "directional bar assembly" PN is 68629-05--this is the chrome part that includes the turn signals, license plate light, etc.--no license plate frame, turn signal lenses, tail lamp lens, etc.--just the chrome piece. This PN is from the rear turn signal & license plate relocation kit, PN 53702-04--it's what I used to replicate the SG fender/facia/LED and license plate below the tail light when I did the mod a couple of years ago.
The SG "directional bar assembly" PN is 68629-05--this is the chrome part that includes the turn signals, license plate light, etc.--no license plate frame, turn signal lenses, tail lamp lens, etc.--just the chrome piece. This PN is from the rear turn signal & license plate relocation kit, PN 53702-04--it's what I used to replicate the SG fender/facia/LED and license plate below the tail light when I did the mod a couple of years ago.
Trending Topics
#9
#10
RE: Can I swap out my RG rear signal bar to SG one?
ORIGINAL: mtairy biker
yes ou can spen a lot of money at harley or you can buy a little barket from soft brake and do the same thing
yes ou can spen a lot of money at harley or you can buy a little barket from soft brake and do the same thing
thanks.
Thread
Thread Starter
Forum
Replies
Last Post
Nilla
Touring Models
1
04-29-2014 08:04 PM