Question about service manual
#11
04-21-2008, 10:41 PM
Extreme HDF Member
RE: Question about service manual
And when you get it, do what I did........
see here>>>>>>>> https://www.hdforums.com/m_3246693/m...tm.htm#3246803
see here>>>>>>>> https://www.hdforums.com/m_3246693/m...tm.htm#3246803
#12
04-21-2008, 11:08 PM
Tourer
RE: Question about service manual
ORIGINAL: IAMSWUTIAMS
And when you get it, do what I did........
see here>>>>>>>> https://www.hdforums.com/m_3246693/m...tm.htm#3246803
And when you get it, do what I did........
see here>>>>>>>> https://www.hdforums.com/m_3246693/m...tm.htm#3246803
OBTW They (HD) also prints a torque book P/N for the 06 edition is 99959-06. Long story short when I bought the Fix My Hog DVD I also bought the "My Service Sheets" too. (I like good records) I sent them a suggestion and in the course of our conversation Chris (Hajer) was kind enough to send me one of these great little books. I use it almost as much as the service manual! BTW Chris is a great guy to do business with!
#13
04-21-2008, 11:14 PM
RE: Question about service manual
ORIGINAL: Neckball
The H-D service manual is the best written, easiest to read manual I have ever owned. With it, you can wrench with confidence. Most of us hesitate at the cost but it will, without a doubt, save you al least one trip to the dealer and when it does, you've gotten your money back and more.
The H-D service manual is the best written, easiest to read manual I have ever owned. With it, you can wrench with confidence. Most of us hesitate at the cost but it will, without a doubt, save you al least one trip to the dealer and when it does, you've gotten your money back and more.
Just finished my 1000 mile tonight, manual walked me right through it no problems at all, it already saved me $250+
#14
04-21-2008, 11:26 PM
RE: Question about service manual
ORIGINAL: Big Tom
Thanks for the responce guys I guess the manual will be a must have before I start my engine build. I have built many car engines but for some reason am a little intimidated by tearing into my bike but as long as I have a good manual I feel comfident to do my own build.
Thanks for the responce guys I guess the manual will be a must have before I start my engine build. I have built many car engines but for some reason am a little intimidated by tearing into my bike but as long as I have a good manual I feel comfident to do my own build.
Thread
Thread Starter
Forum
Replies
Last Post
Bradley Jones
Touring Models
2
07-04-2013 09:12 AM