EZ- UP center stand/ Wheeldock.com
#12
RE: EZ- UP center stand/ Wheeldock.com
I put one on over the winter and really like it. Last weekend I installed a removeable luggage rack and it was nice to work on the bike upright and level rather than tilted over. I have tight quarters in my garage/shop soparking it upright saves me some space too.
The product is every bit as good as all the othershere have saidit is.
The product is every bit as good as all the othershere have saidit is.
#13
#14
Join Date: Oct 2006
Location: Retired and living in the mountains of NE PA
Posts: 1,830
Likes: 0
Received 8 Likes
on
5 Posts
RE: EZ- UP center stand/ Wheeldock.com
I have a wheel chock that allows me to park the bike straight up and down in the garage and it makes it MUCH easier to clean the side that would normally be leaning downward. This center stand will let me do the same thing in the driveway (and elsewhere) without having to haul the wheel chock out. I don't think I'd use the center stand on anything but a level surface, however.
#15
RE: EZ- UP center stand/ Wheeldock.com
ORIGINAL: 2002jadefatboy
I have been interested in this stand also. Could one of you guys who have it please take a few pics from different anglesof the stand retracted and post them. I've seen tons of pics on their site and on here with the stand down, but I really want to see it when it is in the up position. I have to know how visible that lever is before I buy one. I'm justgoofy like that...
I have been interested in this stand also. Could one of you guys who have it please take a few pics from different anglesof the stand retracted and post them. I've seen tons of pics on their site and on here with the stand down, but I really want to see it when it is in the up position. I have to know how visible that lever is before I buy one. I'm justgoofy like that...
#17
RE: EZ- UP center stand/ Wheeldock.com
Keystone
Heres my story and Im sticking to it!! I also read all the reviews, and talked to Rod the owner and and ordered the WheelDock CenterStand for my 05 Road King, I loved it put it on in 15ms the only thing I didnt like was it seemed too easy to take off the Centerstand. Anyways the bike never left my garage I sold it but took of the Centerstand with the intention of putting it on the new bike 08 Classic. Spoke to Ron again he seaid it would fit no problem! When I got the bike home I bolted it right on although it the legs looked a little close to the trans on the right side and the belt on the left side, no big thing Im sure just me being ****! All good so far, I put it on the stand and it works great now per instructions I put the bike outside to wash it place a small strip of 1/4 in plywood down so to lift up the rear wheel and wash it when the bikes weight bring the stand into the upright and or locked position the stand snaps in two and the bike goes down, lucky I was holding it. Put it on the jiffy stand and chwnge my underwear!! look at the stand its still mounted to the bike but the leg section seperated from the stand upon close inspection the stand was only tack weldeed not bead welded to the legs. Get on the phone, call Ron he said there was a guy welding the stands a half *** way and he had one other failure like this, so he said he will ship one out to me today with a return box to ship the broken one so he can examine it. DoDo happens and I guess its all about queality control. Rons customer service is the best he really takes the time out to talk to you about any issues and he's always the one to answer the phone, Ill keep you updates as to his promise and the outcome, I have no doubt in my mind, not in th least, that he will be a true gentleman and come thru!!!!, by the way the first thing out of his mouth was, did you or anyone get hurt, and did the bike get damaged, not looking to blame the customer at all!!!! Thanks Bill
Heres my story and Im sticking to it!! I also read all the reviews, and talked to Rod the owner and and ordered the WheelDock CenterStand for my 05 Road King, I loved it put it on in 15ms the only thing I didnt like was it seemed too easy to take off the Centerstand. Anyways the bike never left my garage I sold it but took of the Centerstand with the intention of putting it on the new bike 08 Classic. Spoke to Ron again he seaid it would fit no problem! When I got the bike home I bolted it right on although it the legs looked a little close to the trans on the right side and the belt on the left side, no big thing Im sure just me being ****! All good so far, I put it on the stand and it works great now per instructions I put the bike outside to wash it place a small strip of 1/4 in plywood down so to lift up the rear wheel and wash it when the bikes weight bring the stand into the upright and or locked position the stand snaps in two and the bike goes down, lucky I was holding it. Put it on the jiffy stand and chwnge my underwear!! look at the stand its still mounted to the bike but the leg section seperated from the stand upon close inspection the stand was only tack weldeed not bead welded to the legs. Get on the phone, call Ron he said there was a guy welding the stands a half *** way and he had one other failure like this, so he said he will ship one out to me today with a return box to ship the broken one so he can examine it. DoDo happens and I guess its all about queality control. Rons customer service is the best he really takes the time out to talk to you about any issues and he's always the one to answer the phone, Ill keep you updates as to his promise and the outcome, I have no doubt in my mind, not in th least, that he will be a true gentleman and come thru!!!!, by the way the first thing out of his mouth was, did you or anyone get hurt, and did the bike get damaged, not looking to blame the customer at all!!!! Thanks Bill