http://johnnyvaughn.com/Merchant2/me...ory_Code=WIRES

you could just by wire extensions.....right gauge an color

Several foks sell them....I like dealing with Johnny.

 

Harpoon, Just seen the thread and I hope all is going well. Here is a link to a thread That I found on the forums and it helped a lot the guy did an excellant job describing and illustrating the whole project. I hope this helps.

https://www.hdforums.com/m_1328001/tm.htm


Jeff

 

Get it finished-up?

 

Even easier to buy extended harnesses with switches already attached.....not expensive either....try MiD-USA....download their cat and then locate one of their dealers......hint tho, you need to shop their dealers for price.

You can get the complete harness with switches installed in either chrome or black for about 50 bucks...............just yank it thru the bars and connect like factory....no soldering, no splicing, no grief.

 

Nope, I planned on doing all of the soldering on Sunday but spent most of the day hung over from a St.Patty's day party Sat night.. I will start the soldering tonight.. wish me luck..

Harpoon

 

What he said.
I did mine, it was easy, just a bit time consuming.

CN

 

Also DOUBLE CHECK which wire goes in each spot in the connector when putting it all back together.....don't ask me how I know.

CN

 

Hey Redhwk44,
Yes I read his entire writup and was very good. I was not sure what bike he was doing but I don't believe I needed to perform the disconnection of the gas line from the tank.. I am hoping that that might pertain to a bike with a carburator and mine is Fuel Injection.. But an excellent writup, this is what I love about this community you are all great people and very helpfull.

Harpoon

 

Comfortably numb, I won't ask you how you know but thanks for the heads up. LOL

Ok guys so I just cut the sleeve to to expose the wires that I intend to extend. Well to my surprise I saw a couple of wires that that were soldered already, one was two cable into one and another was 3 cables into 1. Now is this normal? I took a picture of it for you to see.

Thanks

Harpoon

[IMG]local://upfiles/4888/C871E7D6FFB244E4BCF749BCC88C2A5B.jpg[/IMG]

 

I sent this last question late last night so bumping so see if I can get some insight this afternoon.

Thanks

Harpoon