150 rear tire ??
#1
#5
RE: 150 rear tire ??
Pingel makes this spacer for 2000 + model years.
http://www.pingelonline.com/rear_sprocket_spacer.htm
Give them a call. Maybe they can tell you why this spacer wouldn't work on your year! Who knows. Maybe it would.
http://www.pingelonline.com/rear_sprocket_spacer.htm
Give them a call. Maybe they can tell you why this spacer wouldn't work on your year! Who knows. Maybe it would.
#6
RE: 150 rear tire ??
BS.....i run a 150 on my 06 SG with no probs....have since it was new....no spacer....no rub, altho it is close....your bike is the same frame as mine....my setup is a 150/18 Metz....it rates lower for load but i have been loaded all the way from Texas to Colorado with tour pack and wifey with no probs....final drive is accomplished with either the primary pulleys or the countershaft/rear pulleys...they are the same from 00-03
ORIGINAL: NICK56
CANT DO IT.. TIRE WILL MAKE CONTACT WITH THE FINAL DRIVE BELT.. YOU CAN ONLY USE THE STOCK TIRE
CANT DO IT.. TIRE WILL MAKE CONTACT WITH THE FINAL DRIVE BELT.. YOU CAN ONLY USE THE STOCK TIRE
#7
RE: 150 rear tire ??
difference in years --- you can do up to a 160 (remove the belt guard) on a SG
ORIGINAL: Bryan TTM
BS.....i run a 150 on my 06 SG with no probs....have since it was new....no spacer....no rub, altho it is close....your bike is the same frame as mine....my setup is a 150/18 Metz....it rates lower for load but i have been loaded all the way from Texas to Colorado with tour pack and wifey with no probs....final drive is accomplished with either the primary pulleys or the countershaft/rear pulleys...they are the same from 00-03
BS.....i run a 150 on my 06 SG with no probs....have since it was new....no spacer....no rub, altho it is close....your bike is the same frame as mine....my setup is a 150/18 Metz....it rates lower for load but i have been loaded all the way from Texas to Colorado with tour pack and wifey with no probs....final drive is accomplished with either the primary pulleys or the countershaft/rear pulleys...they are the same from 00-03
ORIGINAL: NICK56
CANT DO IT.. TIRE WILL MAKE CONTACT WITH THE FINAL DRIVE BELT.. YOU CAN ONLY USE THE STOCK TIRE
CANT DO IT.. TIRE WILL MAKE CONTACT WITH THE FINAL DRIVE BELT.. YOU CAN ONLY USE THE STOCK TIRE
Trending Topics
#8
RE: 150 rear tire ??
ORIGINAL: Bryan TTM
BS.....i run a 150 on my 06 SG with no probs....have since it was new....no spacer....no rub, altho it is close....your bike is the same frame as mine....my setup is a 150/18 Metz....it rates lower for load but i have been loaded all the way from Texas to Colorado with tour pack and wifey with no probs....final drive is accomplished with either the primary pulleys or the countershaft/rear pulleys...they are the same from 00-03
BS.....i run a 150 on my 06 SG with no probs....have since it was new....no spacer....no rub, altho it is close....your bike is the same frame as mine....my setup is a 150/18 Metz....it rates lower for load but i have been loaded all the way from Texas to Colorado with tour pack and wifey with no probs....final drive is accomplished with either the primary pulleys or the countershaft/rear pulleys...they are the same from 00-03
ORIGINAL: NICK56
CANT DO IT.. TIRE WILL MAKE CONTACT WITH THE FINAL DRIVE BELT.. YOU CAN ONLY USE THE STOCK TIRE
CANT DO IT.. TIRE WILL MAKE CONTACT WITH THE FINAL DRIVE BELT.. YOU CAN ONLY USE THE STOCK TIRE
I have a 03 and am running a 140/90/16 with no problems...I think 2000-2003 run a 1 1/2 belt 2004-2005 or 06 run 1 1/8 belt thats the reason the newer bikes an run a larger tire..
#9