The very bottom one. Look at the wire colors in the harness.

 

Ok, thanks frontiercat.
Hell, I didn't have near this much trouble installing the cruise! I'm pretty much an idiot when it comes to wiring, though!

 

No problem. Take the cap off and shove the wires to the siren in and test before you do any permanent cutting, etc.

Ride on.

 

Roger that. I'll do it tonight when I get home. Really appreciate your help.

 

Thanks for the picture Hdbiker. Thats what I needed. Got mine installed about an hour ago.......
Thanks to all the rest of you guys toooooo.....

Trucky911

 

No prob, Trucky. I was lost on how to install the damned thing.
Yeah, easy install. I cut off the Deutsch head and saved it for future use, but I don't have a clue what I'll need it for. Attached the siren to the plastic cover with Goop, that way I can remove it should I need to.
Thanks to all for your help!

 

I just stuck the wires into the holes on the conector for now. I wonder if we can buy the female connector to connect to the wires and make it look like a factory install. Any body know where these can be bought?...

Trucky911

 

Go to the dealer, you can buy the plugs and pins. It is easy to put the plugs together.I bought plugs and made up a harness for my trailer lights so I did not have to cut any wires.
Clap

 

so just how loud is this siren from radio shack? my bike has the smart siren 2 installed already,and it isnt very loud,i'm wondering if the radio shack siren can be hooked up with the smart siren 2 ,for a louder siren using they both. or have i got this whole thing mixed up and it only will work with no siren installed on the bike??

thanks guys

 

I am wondering the same thing as Birtch White. Can the Radio Shack be installed with the smart siren II.
Clap