need help with tank float
#22
RE: need help with tank float
The trick is to cut the clamp on the hose at the rear of the
pump assy, lift the assy so you can see the pump.
Then use a screwdriver to push down on the pump.
As you push down it releases the hinge, then with a little
finesse you should be able to work it out.
pump assy, lift the assy so you can see the pump.
Then use a screwdriver to push down on the pump.
As you push down it releases the hinge, then with a little
finesse you should be able to work it out.
Thread
Thread Starter
Forum
Replies
Last Post
dannycalderone
General Harley Davidson Chat
16
02-22-2011 07:22 PM