LED Turnsignal question
#1
LED Turnsignal question
I just bought the Radiantz led drop in boards that fit in the bullet style lens. They are great but like all LED they draw so little power that they flash 100mph. I am looking for what people use to cure this issue. I have LED in all my signals both front and rear and I am looking for a equlizer that takes care of both the front and rear lights at the same time, and I am looking for a plug and play resistor. I don't want to have to cut and splice wires. Suggestions are welcomed. Thanks in advance.
Nick
Nick
#2
RE: LED Turnsignal question
I used a biketronics load equalizer on my XL. It was plug and play.Here is the Biketronics web site: http://biketronics.com/homepage.html
When I did mine, I had to contact the owner. He got back to me and was very helpful and friendly on the phone.
If he makes one for your bike, get it. You won't be sorry. He knows his stuff.
Let us know what you find out.
Steve L.
When I did mine, I had to contact the owner. He got back to me and was very helpful and friendly on the phone.
If he makes one for your bike, get it. You won't be sorry. He knows his stuff.
Let us know what you find out.
Steve L.
#3
RE: LED Turnsignal question
I switched out my RK to leds this last week and I REALLY like 'em.
I went to kuryakyn.com and got 'Load Equalizer Adaptor' part# 4837- 12.99-(plug n play) and got two 'Load Equalizers' part# 4810-29.99?-(plug n play).
About 5 min. to install.
ps. They recommend 1 load equalizer per 'pair' of lights.
I went to kuryakyn.com and got 'Load Equalizer Adaptor' part# 4837- 12.99-(plug n play) and got two 'Load Equalizers' part# 4810-29.99?-(plug n play).
About 5 min. to install.
ps. They recommend 1 load equalizer per 'pair' of lights.
#6
Thread
Thread Starter
Forum
Replies
Last Post
griggi63
Ignition/Tuner/ECM/Fuel Injection
3
05-31-2011 10:54 PM