Sceamin Eagle slips ons for Ultra 08
#21
RE: Sceamin Eagle slips ons for Ultra 08
I have the One-piece slash-out SE's on a 07' FLHX, part# 80490-07. got more TQ where I ride, deeper idle than stock, after 3000rpm they wake up, perfect for a Touring bike. Loud is not what I want on a Touring bike. Take a look at this ........ https://www.hdforums.com/m_2394521/tm.htm Chewy
#22
RE: Sceamin Eagle slips ons for Ultra 08
Have the same and agree. I'm very happy with mine.
ORIGINAL: FXSTCHEWY
I have the One-piece slash-out SE's on a 07' FLHX, part# 80490-07. got more TQ where I ride, deeper idle than stock, after 3000rpm they wake up, perfect for a Touring bike. Loud is not what I want on a Touring bike. Take a look at this ........ https://www.hdforums.com/m_2394521/tm.htm Chewy
I have the One-piece slash-out SE's on a 07' FLHX, part# 80490-07. got more TQ where I ride, deeper idle than stock, after 3000rpm they wake up, perfect for a Touring bike. Loud is not what I want on a Touring bike. Take a look at this ........ https://www.hdforums.com/m_2394521/tm.htm Chewy
#23
RE: Sceamin Eagle slips ons for Ultra 08
ORIGINAL: greg09997
Have the same and agree. I'm very happy with mine.
Have the same and agree. I'm very happy with mine.
ORIGINAL: FXSTCHEWY
I have the One-piece slash-out SE's on a 07' FLHX, part# 80490-07. got more TQ where I ride, deeper idle than stock, after 3000rpm they wake up, perfect for a Touring bike. Loud is not what I want on a Touring bike. Take a look at this ........ https://www.hdforums.com/m_2394521/tm.htm Chewy
I have the One-piece slash-out SE's on a 07' FLHX, part# 80490-07. got more TQ where I ride, deeper idle than stock, after 3000rpm they wake up, perfect for a Touring bike. Loud is not what I want on a Touring bike. Take a look at this ........ https://www.hdforums.com/m_2394521/tm.htm Chewy
#24
#25
#27
RE: Sceamin Eagle slips ons for Ultra 08
ORIGINAL: Chuck1
Still tying to find out, from my post above,if thenew SE2 piece are bigger around than the 1 piece? Also does one produce better tuning numbers?
Still tying to find out, from my post above,if thenew SE2 piece are bigger around than the 1 piece? Also does one produce better tuning numbers?
#28
RE: Sceamin Eagle slips ons for Ultra 08
I had the SE slip-ons installed when I did the SE air filter w/ remap. I love the sound....has a nice mellow rumble when cruising...a little 'noise' when I twist the wick. What I like most is when I shut the bike off, I dont hear the 'racket' 1/2 hr later.
Im planning either a SERT or PC III....might go with true duals....dunno yet. Like the current sound...would just like to cut the heat a bit.
Just my opinion.
HAPPY NEW YEAR!!!
Billy G
Im planning either a SERT or PC III....might go with true duals....dunno yet. Like the current sound...would just like to cut the heat a bit.
Just my opinion.
HAPPY NEW YEAR!!!
Billy G
#29
RE: Sceamin Eagle slips ons for Ultra 08
ORIGINAL: FXSTCHEWY
The 2 piece are 4" and give a TAD better #'s, the 1 piece are 3.5" and have a little better sound, I don't "think" they gave the same #'s but the difference is probably nothing you can notice unless your are a Dyno. Chewy
ORIGINAL: Chuck1
Still tying to find out, from my post above,if thenew SE2 piece are bigger around than the 1 piece? Also does one produce better tuning numbers?
Still tying to find out, from my post above,if thenew SE2 piece are bigger around than the 1 piece? Also does one produce better tuning numbers?
#30
RE: Sceamin Eagle slips ons for Ultra 08
ORIGINAL: electaRICK
1 out of 8 would say they like them.
I went with SuperTrapp SE's 3 Db's louder than stock
this is tuff for individual tastes... good luck
1 out of 8 would say they like them.
I went with SuperTrapp SE's 3 Db's louder than stock
this is tuff for individual tastes... good luck