Rush/Fuel Moto custom baffles
#72
RE: Rush/Fuel Moto custom blaffles
i have jamie's fuelmoto setup (with pcIII, ArlenNess big sucker and jackpot/rush pipes)... is anyone getting yellowing/blueing early? \\;\\\\\\; i'm getting that after only 2 weeks... any help?
I have over 4500 miles with mine no problems I say give him a call. He is a great to work with I'm sure he can help.
#74
#75
RE: Rush/Fuel Moto custom blaffles
Question? I have the Rush 2.0 on a SG and when down shifting they really gurgle alot.
 \\;\\\\\\;
They don't back fire, just pop de pop. I quess this is normal stuff?
 \\;\\\\\\;
Also I can't seem to get rid of a high pitched squeak, or chirp sound \\;on the right side, I think it's the rubber mounting bracket for the exhaust under the saddle bag. I tried spraying silicone, helped slightly. Any suggestions?
 \\;\\\\\\;
They don't back fire, just pop de pop. I quess this is normal stuff?
 \\;\\\\\\;
Also I can't seem to get rid of a high pitched squeak, or chirp sound \\;on the right side, I think it's the rubber mounting bracket for the exhaust under the saddle bag. I tried spraying silicone, helped slightly. Any suggestions?
#76
RE: Rush/Fuel Moto custom blaffles
ORIGINAL: speckfisher
Question? I have the Rush 2.0 on a SG and when down shifting they really gurgle alot. They don't back fire, just pop de pop. I quess this is normal stuff?
Question? I have the Rush 2.0 on a SG and when down shifting they really gurgle alot. They don't back fire, just pop de pop. I quess this is normal stuff?
Also I can't seem to get rid of a high pitched squeak, or chirp sound on the right side, I think it's the rubber mounting bracket for the exhaust under the saddle bag. I tried spraying silicone, helped slightly. Any suggestions?
#77
RE: Rush/Fuel Moto custom blaffles
I second iclick on replacing the mount. As far as the gurgling, IMHO it is normal ( I know we all are sick of hearing that phrase). I put over 30K on the stock set up and it gurgled, it was just so quiet, you could miss it. I used Permatex Copper Sealant on mine and am getting a bit of a pop, when shifting gears at lower rpms. I sent an email off to Jamie to ask his opinion. Right now the bike is out of commission. It seems to have ate some needle bearings in the tranny. The wrench caught it when doing the 35k service. I love magnetic drain plugs! At least I did not get stranded on the side of the road. And it is still under warranty!
Thread
Thread Starter
Forum
Replies
Last Post