1/4 12 Pt Socket
#13
10-31-2007 | 09:22 PM
Elite HDF Member
Joined: Jan 2006
Posts: 4,388
Likes: 0
From: Dallas,Texas
RE: 1/4 12 Pt Socket
I just got back from sears and they only have the 1/4 inch drive 1/4 12pt socket. No 3/8 drive like my torque wrench. Since everyone says not to use a adapter or exstension with torque wrench. Sears only had one set of tools that had a 3/8 drive 1/4 12pt socket out of all them sets of tools.So are ya'll useing the 1/4 drive with an adapter or what.
#16
10-31-2007 | 09:41 PM
Elite HDF Member
Joined: Jan 2006
Posts: 4,388
Likes: 0
From: Dallas,Texas
#17
10-31-2007 | 09:42 PM
Elite HDF Member
Joined: Jun 2006
Posts: 3,698
Likes: 10
From: Longview, Washington
RE: 1/4 12 Pt Socket
ORIGINAL: 06ultra
I just got back from sears and they only have the 1/4 inch drive 1/4 12pt socket. No 3/8 drive like my torque wrench. Since everyone says not to use a adapter or exstension with torque wrench. Sears only had one set of tools that had a 3/8 drive 1/4 12pt socket out of all them sets of tools.So are ya'll useing the 1/4 drive with an adapter or what.
I just got back from sears and they only have the 1/4 inch drive 1/4 12pt socket. No 3/8 drive like my torque wrench. Since everyone says not to use a adapter or exstension with torque wrench. Sears only had one set of tools that had a 3/8 drive 1/4 12pt socket out of all them sets of tools.So are ya'll useing the 1/4 drive with an adapter or what.
#18
10-31-2007 | 09:47 PM
Ultimate HDF Member
Joined: Apr 2006
Posts: 7,498
Likes: 19
From: East Alton, IL
#20
10-31-2007 | 10:06 PM
Elite HDF Member
Joined: Jan 2006
Posts: 4,388
Likes: 0
From: Dallas,Texas
RE: 1/4 12 Pt Socket
ORIGINAL: sifularson
Geez man. Think about it. Does your 3/8 drive torque wrench even do INCH pounds. I doubt it. It does FOOT pounds. Snug the damn thing up and call it good.
ORIGINAL: 06ultra
I just got back from sears and they only have the 1/4 inch drive 1/4 12pt socket. No 3/8 drive like my torque wrench. Since everyone says not to use a adapter or exstension with torque wrench. Sears only had one set of tools that had a 3/8 drive 1/4 12pt socket out of all them sets of tools.So are ya'll useing the 1/4 drive with an adapter or what.
I just got back from sears and they only have the 1/4 inch drive 1/4 12pt socket. No 3/8 drive like my torque wrench. Since everyone says not to use a adapter or exstension with torque wrench. Sears only had one set of tools that had a 3/8 drive 1/4 12pt socket out of all them sets of tools.So are ya'll useing the 1/4 drive with an adapter or what.
Thanks Pacemaker for the heads up . I'll go up there in the morning.