What is stock HP and torque
#4
#6
RE: What is stock HP and torque
Roughly 65 HP and about 86 torque.
[/quote]
My 04 Carbed Road King 100% Stock Dyno'd at 59HP & 70TQ at the rear wheel.
65HP and 86TQ is not rear wheel power on a stock 88" Twin cam. Just ask anyone who dyno tunes bikes. The numbers above are at the crank before the tranny.
#7
RE: What is stock HP and torque
Here's a listing that will give you different options and their HP and TQ. http://www.nightrider.com/biketech/hplist_twin_cam.htm
Trending Topics
#9
RE: What is stock HP and torque
ORIGINAL: Otter
Sure dosent sound like a lot when I think about my rusty ol rods I had when I was 19 - pumping out ~400hp. But is sure feels sweet pulling out from a traffic light. ahhhhhh....[sm=gears.gif]
Sure dosent sound like a lot when I think about my rusty ol rods I had when I was 19 - pumping out ~400hp. But is sure feels sweet pulling out from a traffic light. ahhhhhh....[sm=gears.gif]
#10
RE: What is stock HP and torque
ORIGINAL: 04RoadKing
Roughly 65 HP and about 86 torque.
Roughly 65 HP and about 86 torque.
My 04 Carbed Road King 100% Stock Dyno'd at 59HP & 70TQ at the rear wheel.
65HP and 86TQ is not rear wheel power on a stock 88" Twin cam. Just ask anyone who dyno tunes bikes. The numbers above are at the crank before the tranny.
65HP and 86TQ is not rear wheel power on a stock 88" Twin cam. Just ask anyone who dyno tunes bikes. The numbers above are at the crank before the tranny.
SaBiGe didn't specify. I was just using Harley's specs from a couple years ago.