Bosch Crimping Tool
#12
10-26-2007, 01:05 PM
Road Warrior
RE: Bosch Crimping Tool
The DMC is the only one that will successfully work with Deutch connectors. You can or course solder them, and not need a crimp at all.
We have had our DMC for at least ten (10) years and have used it weekly at the race track as well as in the shops.
Never a bad connection.
It all depends on the quality of work you want to turn out.
We have had our DMC for at least ten (10) years and have used it weekly at the race track as well as in the shops.
Never a bad connection.
It all depends on the quality of work you want to turn out.
#13
10-26-2007, 01:12 PM
#14
10-26-2007, 02:44 PM
Former Sponsor
RE: Bosch Crimping Tool
ORIGINAL: NCCopBikeRider
The DMC is the only one that will successfully work with Deutch connectors. You can or course solder them, and not need a crimp at all.
We have had our DMC for at least ten (10) years and have used it weekly at the race track as well as in the shops.
Never a bad connection.
It all depends on the quality of work you want to turn out.
The DMC is the only one that will successfully work with Deutch connectors. You can or course solder them, and not need a crimp at all.
We have had our DMC for at least ten (10) years and have used it weekly at the race track as well as in the shops.
Never a bad connection.
It all depends on the quality of work you want to turn out.
Thread
Thread Starter
Forum
Replies
Last Post
obd2works
General Topics/Tech Tips
0
05-31-2014 04:00 AM
Shawrco
Exhaust System Topics
9
01-23-2013 04:01 PM
