my right ear for an flhx rear fender
#1
10-24-2007, 10:42 AM
Join Date: May 2007
Location: CDM, CA
Posts: 439
Likes: 0
Received 0 Likes
on
0 Posts
my right ear for an flhx rear fender
or at least one that will work with my flhx trimmings and tri light bar deally and not have the holes and crap my RKC have that is black for less then the kings ransome and large amuont of time HD charges
Also would give a portion of left pinky toe for a plain FL front fender, black, at a decent cost. that is all the body parts im willing to give up this morning for hd body parts. thank you. that is all.
Also would give a portion of left pinky toe for a plain FL front fender, black, at a decent cost. that is all the body parts im willing to give up this morning for hd body parts. thank you. that is all.
#2
10-24-2007, 10:48 AM
RE: my right ear for an flhx rear fender
Not into body parts from a dude, but you can buy the rear flhx trim on ebay, see all kinds from new to used . You can buy the whole setup from the dealer (no you dont have to own a flhx) it costs around 250.00 for everything. It will bolt right on a rk, just remove fender edge trim if your has it.
#3
10-24-2007, 11:31 AM
Join Date: May 2007
Location: CDM, CA
Posts: 439
Likes: 0
Received 0 Likes
on
0 Posts
#4
10-24-2007, 12:59 PM
Road Captain
#5
10-24-2007, 01:32 PM
Road Captain
RE: my right ear for an flhx rear fender
ORIGINAL: Fast Eddie
Order it from Chicago Harley. I got everythingI needed for less than $200. I can't figure out why people are paying the prices they pay for this on Ebay used when the can get it new.
Order it from Chicago Harley. I got everythingI needed for less than $200. I can't figure out why people are paying the prices they pay for this on Ebay used when the can get it new.
#6
10-24-2007, 01:32 PM
#7
10-24-2007, 01:35 PM
Road Master
Trending Topics
#8
10-24-2007, 01:53 PM
RE: my right ear for an flhx rear fender
Zanotti Motor Co.
http://www.zanottimotor.com/
3596 SCREW SADDLEBAG BRACKET (2) $ .50
59739-06DH FASCIA RF FLHX/I VIVID (1) $ 63.64 Note:06DH is for Vivid Black so if you have a different color check with HD for the correct number
59749-06 PLUG REAR FENDER (2) $ 1.87
59790-06 SUPPORT FASCIA/REAR FENDER (1) $ 6.98
59818-06 STUD PLATE (2) $ 7.56
68358-07 KIT TRI-BAR RUN/BRAKE LIGHT (1) $ 70.70
7499 NUT FLANGE CRUISE CONTR (6) $1.10
That's all you Need
http://www.zanottimotor.com/
3596 SCREW SADDLEBAG BRACKET (2) $ .50
59739-06DH FASCIA RF FLHX/I VIVID (1) $ 63.64 Note:06DH is for Vivid Black so if you have a different color check with HD for the correct number
59749-06 PLUG REAR FENDER (2) $ 1.87
59790-06 SUPPORT FASCIA/REAR FENDER (1) $ 6.98
59818-06 STUD PLATE (2) $ 7.56
68358-07 KIT TRI-BAR RUN/BRAKE LIGHT (1) $ 70.70
7499 NUT FLANGE CRUISE CONTR (6) $1.10
That's all you Need
#9
10-24-2007, 02:02 PM
Road Master
RE: my right ear for an flhx rear fender
ORIGINAL: IceHeritage
Zanotti Motor Co.
http://www.zanottimotor.com/
3596 SCREW SADDLEBAG BRACKET (2) $ .50
59739-06DH FASCIA RF FLHX/I VIVID (1) $ 63.64 Note:06DH is for Vivid Black so if you have a different color check with HD for the correct number
59749-06 PLUG REAR FENDER (2) $ 1.87
59790-06 SUPPORT FASCIA/REAR FENDER (1) $ 6.98
59818-06 STUD PLATE (2) $ 7.56
68358-07 KIT TRI-BAR RUN/BRAKE LIGHT (1) $ 70.70
7499 NUT FLANGE CRUISE CONTR (6) $1.10
That's all you Need
Zanotti Motor Co.
http://www.zanottimotor.com/
3596 SCREW SADDLEBAG BRACKET (2) $ .50
59739-06DH FASCIA RF FLHX/I VIVID (1) $ 63.64 Note:06DH is for Vivid Black so if you have a different color check with HD for the correct number
59749-06 PLUG REAR FENDER (2) $ 1.87
59790-06 SUPPORT FASCIA/REAR FENDER (1) $ 6.98
59818-06 STUD PLATE (2) $ 7.56
68358-07 KIT TRI-BAR RUN/BRAKE LIGHT (1) $ 70.70
7499 NUT FLANGE CRUISE CONTR (6) $1.10
That's all you Need
Is there much to it in the way of labor?
#10
10-24-2007, 02:11 PM
Road Master