adjusting the spots.....
#11
RE: adjusting the spots.....
remove the turn signal under the spot light with an allen wrench.
Buy a cheap $5 or so deep well 9/16 socket from autoparts store.
Cut a slot in the side with a die grinder.
Loosen the nut holding the spot light to the mount. Adjust as needed
re tighten and reassemble.
The slot is for the wire to go into.
Buy a cheap $5 or so deep well 9/16 socket from autoparts store.
Cut a slot in the side with a die grinder.
Loosen the nut holding the spot light to the mount. Adjust as needed
re tighten and reassemble.
The slot is for the wire to go into.
Thread
Thread Starter
Forum
Replies
Last Post