Moble 1 20w50 in all 3 holes?
09-21-2007 | 01:27 PM
Joined: Oct 2006
Posts: 630
Likes: 1
From:
RE: Moble 1 20w50 in all 3 holes?
I like the following in my '07:
Mobil 1 20W-50 V-twinin engine and primary
Mobil 1 90/140 synthetic trans in transmission.
I just put 75/90 in my trans for the fall, but prefer the 90/140 - very smooth and quiet.
09-21-2007 | 01:31 PM
Joined: Jan 2006
Posts: 3,015
Likes: 5
From: Alaska
RE: Moble 1 20w50 in all 3 holes?
Quote:
ORIGINAL: ironoxide
Yes, but I use V-twin in the crankcase, formula+ in the primary, and Mobil one 75w-90 gear oil in the trans.
Same here.
09-21-2007 | 01:35 PM
Joined: Jun 2007
Posts: 1,539
Likes: 7
From:
RE: Moble 1 20w50 in all 3 holes?
Mobil 1 20 50 in Engine and Primary
75/90 in Trans
09-21-2007 | 01:41 PM
Joined: Nov 2006
Posts: 1,699
Likes: 2
From: Deltona, FL
RE: Moble 1 20w50 in all 3 holes?
I'm with NCCop on this one. I've used Mobil 1 20w50 in Eng and Primary and 75/90 in tranny for the last couple of oil changes. No problems and the bike runs cooler and more quiet. Shifting is also easier.
09-21-2007 | 02:10 PM
Joined: Jun 2007
Posts: 252
Likes: 0
From:
RE: Moble 1 20w50 in all 3 holes?
Quote:
ORIGINAL: madurodave
I like the following in my '07:
Mobil 1 20W-50 V-twinin engine and primary
Mobil 1 90/140 synthetic trans in transmission.
I just put 75/90 in my trans for the fall, but prefer the 90/140 - very smooth and quiet.
Ditto here...
09-21-2007 | 02:24 PM
Thread Starter
|
Road Warrior
Joined: Jul 2007
Posts: 1,583
Likes: 3
From: Sevierville, TN
RE: Moble 1 20w50 in all 3 holes?
Thanks guys as always I can count on the answers needed.
09-21-2007 | 02:30 PM
Joined: Sep 2006
Posts: 793
Likes: 23
From: AZ
RE: Moble 1 20w50 in all 3 holes?
Is the Mobil 1 75/90 a synthetic blend?
Thanks,
Saint
09-21-2007 | 02:55 PM
Joined: Jan 2006
Posts: 3,015
Likes: 5
From: Alaska
RE: Moble 1 20w50 in all 3 holes?
Quote:
ORIGINAL: st john
Is the Mobil 1 75/90 a synthetic blend?
Thanks,
Saint
Are you asking if it is a blend of full syn oils or a semi-syn like HD's Syn 3 ?
It is a full syn oil.
09-21-2007 | 02:58 PM
Joined: Nov 2005
Posts: 1,551
Likes: 2
From: Contributor to HDForums.com
RE: Moble 1 20w50 in all 3 holes?
Not to be a smart *** here, but why not just stick with factory recommendations?
Seriously. I'd just like to know.
09-21-2007 | 03:02 PM
"Moderator & Connoisseur of Ice Cream"
Joined: Apr 2005
Posts: 7,008
Likes: 5
From: Montgomery Al
RE: Moble 1 20w50 in all 3 holes?
Quote:
ORIGINAL: hoosierhog88
Not to be a smart *** here, but why not just stick with factory recommendations?
Seriously. I'd just like to know.
The syn in the motor gives you longer life and better viscosity at higher temps.
The heavier weight in the tranny gives you more shock resistance and shear resistance.
The Formula + in the primary just does what it is designed to do.