Can I remove this bolt?
#11
.
I took a look at the service manual. In my case the 2011 Touring Service Manual, Chassis chapter, rear fork section. I see no reason why you can not remove the screw (fork bracket screw) to delete the tag.
It indicates 2 drops of blue Loctite before installing it.
2.21 REAR FORK, Installation/Apply two drops of
Loctite Medium Strength Threadlocker 243 (blue)
to threads 55-65 ft-lbs
I took a look at the service manual. In my case the 2011 Touring Service Manual, Chassis chapter, rear fork section. I see no reason why you can not remove the screw (fork bracket screw) to delete the tag.
It indicates 2 drops of blue Loctite before installing it.
2.21 REAR FORK, Installation/Apply two drops of
Loctite Medium Strength Threadlocker 243 (blue)
to threads 55-65 ft-lbs
#12
The following users liked this post:
GalvTexGuy (08-23-2024)
#13
Just giving you hell, pull the bolt and then put it back. Your bike won't explode, it'll be fine.
#14
It might not explode, but you might want to tighten it to torque specs and, as mentioned, put a couple of drops of blue Loctite on the fastener.
Last edited by GalvTexGuy; 08-23-2024 at 02:35 PM.
The following users liked this post:
steelpony16 (08-25-2024)
#17
An easy to remove bolt on plate is generally not permitted for an inspection sticker in many places.
Reason: Because it could be removed and placed on another bike.
Rather weird because so many parts of the bike can be removed.
Some plates are designed for the sticker to cover the bolt and those may be accepted but it depends on your area.
Reason: Because it could be removed and placed on another bike.
Rather weird because so many parts of the bike can be removed.
Some plates are designed for the sticker to cover the bolt and those may be accepted but it depends on your area.
#18
Join Date: Aug 2013
Location: Somewhere on the Bourbon trail
Posts: 5,633
Received 1,632 Likes
on
1,165 Posts
#19
Join Date: Aug 2006
Location: South Central, PA Near the MD Border
Posts: 22,137
Received 21,921 Likes
on
7,607 Posts
#20