Whats your next upgrades?
#11
The following users liked this post:
M Oclaf (08-02-2022)
#12
I keep saying I”m gonna do it… I keep running out of time to do so year after year.
Woods 22XE cam, new pushrods, lifters, cuffs, oil pump.
Keep going back and forth with a 2 into 1 or true duals from Fuel Moto.
Mueller slave kit.
Gonna get it done sooner or later, but I’m doing it my way… Trip from MI to FM shop in WI. Take a week. Schedule a day and a half at FM and do some local touring via car/Uber to the Harley Museum, etc., then… nice long ride home with all that extra Powah and fun once it’s hot off the dyno.
Woods 22XE cam, new pushrods, lifters, cuffs, oil pump.
Keep going back and forth with a 2 into 1 or true duals from Fuel Moto.
Mueller slave kit.
Gonna get it done sooner or later, but I’m doing it my way… Trip from MI to FM shop in WI. Take a week. Schedule a day and a half at FM and do some local touring via car/Uber to the Harley Museum, etc., then… nice long ride home with all that extra Powah and fun once it’s hot off the dyno.
The following users liked this post:
kloccwork419 (08-02-2022)
#13
Got a set of rear CD bag lights, standard (non-sequential) today. Might install them later.
Have a set of Revo-A's inbound. Need to get a bike jack to install them. Might just get a cheap Harbor Freight one for now, I have so little use for one.
Eventually a chopped Tour-Pack. I want a midnight crimson lid and vivid black base, so whoever can accommodate that will likely get my business. I hear HW paint jobs might be better than AB though. Don't think I want to cough up twice as much for the genuine OEM article. Probably will add an AB Reaper light kit. But this can probably wait until winter. (The rainy season here in CA.)
Have a set of Revo-A's inbound. Need to get a bike jack to install them. Might just get a cheap Harbor Freight one for now, I have so little use for one.
Eventually a chopped Tour-Pack. I want a midnight crimson lid and vivid black base, so whoever can accommodate that will likely get my business. I hear HW paint jobs might be better than AB though. Don't think I want to cough up twice as much for the genuine OEM article. Probably will add an AB Reaper light kit. But this can probably wait until winter. (The rainy season here in CA.)
#14
@YZR If you don't care it wont matter. Kuryakyn sells that same console but only in black or chrome. The difference is, it's metal. The Advanblack one is plastic and you can see the surface imperfections at the bottom where the tab screws in.
#15
The following 5 users liked this post by ChromeJunkie:
Dsm Limited (08-11-2022),
M Oclaf (08-02-2022),
OkieBill (08-07-2022),
rauchman (08-12-2022),
Redlegvzv (08-15-2022)
#16
#18
#19
#20
The following users liked this post:
kloccwork419 (08-02-2022)