What the **** is up with my horn??
#11
08-13-2007, 02:41 PM
RE: What the **** is up with my horn??
My problem was a looseconnection I guess. I would fiddle with it and get it working fine before I started the motor. Then I would check whileriding and it didn't work. I foundI could reach under while riding and touch the wire to get it working again, but wasn't the fix I wanted.So I took a small piece ofaluminum foil and stuck on the connector between the horn and wire and it has worked fine so far.
Beary
Beary
#12
08-13-2007, 03:00 PM
RE: What the **** is up with my horn??
Mine did the same thing - sounded like a sick goose half of the time. So did the horn on a friend's Ultra Classic.
Tried everything and it would work fine for a while, then crap out again.
Didn't want the dealer to replace it with another plastictoot.
Picked up a FIAMM Freeway Blaster Low Tone, F 72112 at Advance Auto
Metal horn, not plastic, 130d, for around $15. Installed in a few minutes and no more "goose with a cold" sound.
My friendreplaced his too and no problems since.
Sammi
Tried everything and it would work fine for a while, then crap out again.
Didn't want the dealer to replace it with another plastictoot.
Picked up a FIAMM Freeway Blaster Low Tone, F 72112 at Advance Auto
Metal horn, not plastic, 130d, for around $15. Installed in a few minutes and no more "goose with a cold" sound.
My friendreplaced his too and no problems since.
Sammi
Thread
Thread Starter
Forum
Replies
Last Post
Keithhu
Softail Models
11
06-01-2012 12:27 PM
