Thinking of replacing my factory wire wheels with aluminum tubeless wheels. Wonder what year model "takeoffs", besides 2007, would fit my 2007 Road King Classic?

 

Subscribed, I want to change mine out as well.

rk classic.

 

As an example the 02-07 REAR Black 9 spoke "Wagon" wheels will fit
And `00-07 FRONT

 

These are early rears so you cant use them , pic is for reference to style

 

What is the difference with the 00-01 rear wheels?

 

Made for 3/4" rear axle
The bore through the center will not accept the 1" or 25/mm spacer

 

Does this look like a 1" bearing? Reason I ask is that I purchased a set of wagon wheels off ebay for my 07 RKC and I never thought to ask what year they were off of, because I assumed 2000-08 were the same except for the bearings.

 

2004-08 Road king , Electra Glide , Road Glide will fit . Got rid of my spokes , originally 16x3 front , 16x5 rear , I put a 17x3 front , 16x5 rear on my 10 king from a 13 Electra Glide , no mods needed .

This link should help you , good luck .

https://ridewrightwheels.com/pages/m...-fitment-chart

 

[QUOTE=rtbuck89;19890887]Does this look like a 1" bearing? Reason I ask is that I purchased a set of wagon wheels off ebay for my 07 RKC and I never thought to ask what year they were off of, because I assumed 2000-08 were the same except for the bearings.

I made the same assumption
You can put later / larger BEARINGS in the early wheels
It`s the SPACER that doesn`t fit "Multihdrdr" explained why

( I`d like to assume the casting is the same and the center could be bored to allow retrofit, BUT that`s pure conjecture )

 

08 was the Identical wheel with a change to 25mm bearings (and a bearing shim)



.