08 SERT map files
#21
RE: 08 SERT map files
ORIGINAL: itsmyforte
so from what i understand two things from this thread.
A. an 07 or prior year SERT device (not map) will not work on an 08, or the maps for prior years.
B. you can only use aftermarket slip-ons with the stage one downloadIF you keep the stock headers intact?
so from what i understand two things from this thread.
A. an 07 or prior year SERT device (not map) will not work on an 08, or the maps for prior years.
B. you can only use aftermarket slip-ons with the stage one downloadIF you keep the stock headers intact?
2007 & 2008 are not the same and not compatible. At least in the touring bikes.
#23
RE: 08 SERT map files
SERT 'K' CD will be released sometime in September... you can order it now from Zanotti's (I did)
I have last year's SERT - so am only looking for the new CD for the '08's. Has anyone heard that new SERT hardware is required? Zanotti's says it still uses the same serial interface cable as last year, so it sounds like it is the same unit. (cause why would you re-design the SERT and not change it to USB.)
Here is the number: 32117-01L
I have last year's SERT - so am only looking for the new CD for the '08's. Has anyone heard that new SERT hardware is required? Zanotti's says it still uses the same serial interface cable as last year, so it sounds like it is the same unit. (cause why would you re-design the SERT and not change it to USB.)
Here is the number: 32117-01L
#25
I'm looking to see if anyone has a dyno tuned SERT map that would be a good starter map for the following build -
'05 touring bike
95"
9:6 CR
Big-Boyz Head work
Andrews 37 Grind cams
high-flow air cleaner
Rinehart tru Dual exhaust
I'm using the 4.77 software for the SERT.
Let me know,
Paul
'05 touring bike
95"
9:6 CR
Big-Boyz Head work
Andrews 37 Grind cams
high-flow air cleaner
Rinehart tru Dual exhaust
I'm using the 4.77 software for the SERT.
Let me know,
Paul
Thread
Thread Starter
Forum
Replies
Last Post
grandpawmoses
Ignition/Tuner/ECM/Fuel Injection
2
11-24-2007 05:05 PM