I just jumped the 2 terminals and was able to get apple carplay with out any download . Apple carplay showed up as soon as I i connected my phone to the usb port Thanks to everyone who contributed to this thread.

 

same for me, jumped the pins and carplay shows up when I connect my phone

 

What I dont understand, and I might be missing something.......... Is why can you take a CB dash plug, and make a jumper out of it, then you can plug it in when you want, and take it off when you dont.

Is getting under the Fairing and hooking up the plug to the harness the Only way? I have not bought a manual for my 21 U L yet, so I cant look this up.

 

Not sure what you're asking here? Both work basically the same way...plug it into it's respective connector, with iPhone plugged in to USB (or wireless connection) and you get CarPlay.
I have both and much prefer the headset (CB) jumper that plugs into the console on the tank. Problem with the one that plugs into the WHIM connector under the fairing is, it's not easily removed.
Once it's plugged in the WHIM connector, it renders the wired headset in-operable. If I want to use my wired headset, I'd have to remove the fairing to unplug the jumper...not real convenient.
With the console dash plug it's so much easier. Plug it in...CarPlay work. If I want to use my headset, remove it, plug in headset and CarPlay still works as the headset (mic) is plugged in.
Hope that helps.

 

Thank you! thats a big help... so... there is a jumper plug for the console, thats all I was wanting to know, Who is selling that or... which pins get jumped?

 

Happy to help. Here's the one I bought off eBay...https://www.ebay.com/ipp/29420462225...2047675.l48352

 

This link is defunct, but I found another one online, but I'm not paying $100 :-0

https://bohnmancustoms.com/product/h...-7pin-adapter/

 

Hmmm...try this one, it's from my summary. This one is $49...https://www.ebay.com/itm/29420462225...53.m1438.l2649

 

Ok, so I ordered a 7 Pin plug today, when it comes, and if it get it to wok, I'll let everybody know.

https://www.showmecables.com/7-pin-d...nector-plastic

 

It should. Just have to jump the right pins.
The guy selling the plug for $100 is taking a 12V adapter dust/dirt plug for a cigarette lighter adapter in the fairing of a batwing and cutting/gluing the DIN/Pins inside of that.
As far as ascetics and usability, hats off to him.
$100? Don’t think so…