New handlebars
#11
#12
I just installed 12" KST 6 Benders on my 2011 SG. The only thing I had to change was the clutch cable (and if you wanted to do it on the cheap, you could route outside the fairing and run the stock cable). There is plenty of wiring, and the brake cable (my bike has ABS) was long enough after re-routing.
I did not internally route my wires, but I believe that if I had it would have worked. I bought the Burly brand kit that included a clutch cable and wire extensions.
I did not internally route my wires, but I believe that if I had it would have worked. I bought the Burly brand kit that included a clutch cable and wire extensions.
#13
What bars are you looking at getting, as in brand of 12 inch bars? Hill Country Custom Cycles does a lot of installs and they can tell you exactly what you'll need for what bars you get on your bike.
https://hillcountrycustomcycles.com/
https://hillcountrycustomcycles.com/
Thread
Thread Starter
Forum
Replies
Last Post