options for handlebars for streetglide
#11
10-19-2019, 04:41 PM
Seasoned HDF Member
If you have time a couple of (umm 3) questions Please Sir
1 Are these just +2 up and how much pullback?
2 Are they a Narrow sweeper verses a Sweeper?
3 Any chance you still have a part # for them?
Thanks for your time ??? Am I correct remembering you from the EVO forum
WP
Last edited by WP50; 10-19-2019 at 04:45 PM. Reason: add
#12
10-20-2019, 06:53 AM
#14
10-20-2019, 08:50 AM
Seasoned HDF Member
#15
10-21-2019, 01:43 PM
Hope the following will help. Answers in line...
This sounds like what I'm looking for as well. Have looked at their site and there are few options in the sweeper category. Besides just the +2.
If you have time a couple of (umm 3) questions Please Sir
1 Are these just +2 up and how much pullback? They are the sweeper plus 2 handlebars to fit 1996-2013 batwing fairings, they have about two more inches of pullback as well as the extra height
2 Are they a Narrow sweeper verses a Sweeper? the narrow sweeper is for the 2014 and up batwing fairings
3 Any chance you still have a part # for them? I do not, sorry about that.
Thanks for your time ??? Am I correct remembering you from the EVO forum - I was on the evo forum for many years as 89flht and posted a lot for both my old EG and FXR.
I searched the touring site for a while when picking out the bars and I searched on Kromewerks +2 sweepers. There were a lot of posts with some folks who posted great pictures so you could see the wrist angle, pullback and height. It is worth a quick search and read , I am sure they have the pn# posted in those threads as well.
WP
If you have time a couple of (umm 3) questions Please Sir
1 Are these just +2 up and how much pullback? They are the sweeper plus 2 handlebars to fit 1996-2013 batwing fairings, they have about two more inches of pullback as well as the extra height
2 Are they a Narrow sweeper verses a Sweeper? the narrow sweeper is for the 2014 and up batwing fairings
3 Any chance you still have a part # for them? I do not, sorry about that.
Thanks for your time ??? Am I correct remembering you from the EVO forum - I was on the evo forum for many years as 89flht and posted a lot for both my old EG and FXR.
I searched the touring site for a while when picking out the bars and I searched on Kromewerks +2 sweepers. There were a lot of posts with some folks who posted great pictures so you could see the wrist angle, pullback and height. It is worth a quick search and read , I am sure they have the pn# posted in those threads as well.
WP
The following users liked this post:
WP50 (10-24-2019)
#16
10-21-2019, 03:44 PM
Club Member
Thank you!
Here's a thread with plenty of pics of the Klockwerks 2+2 Sweepers: https://www.hdforums.com/forum/new-r...s-install.html
Here too: https://www.hdforums.com/forum/new-r...-included.html
Here's a thread with plenty of pics of the Klockwerks 2+2 Sweepers: https://www.hdforums.com/forum/new-r...s-install.html
Here too: https://www.hdforums.com/forum/new-r...-included.html
Last edited by BrandonSmith; 10-21-2019 at 03:55 PM.
The following users liked this post:
WP50 (10-24-2019)
#18
10-21-2019, 09:18 PM
#20
10-23-2019, 01:49 PM
Seasoned HDF Member
Do you have a reach seat on your bike or just the stock one?
Thanks for your time
WP