Hey guys hoping someone can confirm if this is possible or not. Have a 2016 Road Glide special with the 103 twin cam. I have the Jugs,Pistons,255 Cams,Throttle body,Rocker arms,Injectors,Lifters,Pushrods out of a 2017 Dyna Low Rider S. Will this bolt into my RG with using the stock 103CI heads?
I don't think it will work. The cases will have to be bored out to fit the 110 jugs.... they are not the same as the various 110 "drop in kits".
__________________________________________________ ____ For ROCKOUT information & purchasing please click HERE For all Twin Cams and Evo Big Twins & Sportsters
__________________
NO, they DON'T all do that!
ROCKOUT rocker shaft inserts... make the tapping STOP! From the guy that FOUND and CURED the problem NO ONE ELSE COULD, thank you for your support! Ordering & info http://www.rockout.bizOn ebay! ...CLICK HERE Also on amazon.com...
I don't think it will work. The cases will have to be bored out to fit the 110 jugs.... they are not the same as the various 110 "drop in kits".
__________________________________________________ ____ For ROCKOUT information & purchasing please click HERE For all Twin Cams and Evo Big Twins & Sportsters
Correct. The stock 110s can go to 117 kits wout case boring because as said the 110 is different spigot OD than the 110 drop on kits.
09-14-2019 | 11:18 PM
Roadglide 103CI to 110Ci Big Bore
