MMI Graduate - Starting Wage @ Dealer ?
#21
07-13-2007, 07:48 AM
Seasoned HDF Member
RE: MMI Graduate - Starting Wage @ Dealer ?
ORIGINAL: vegashd
do you actually know what flat rate is? or did you go by what they told you?
ORIGINAL: skratch
this i understand, if a 2 hr job takes 90 mins, i still pay for 2 hrs. thats the beauty of flat rate (for the tech anyway). but, if it takes them 3 hrs, i still only pay for 2. i didn't equate this with 'cushioning' cause its up to the technical abilities of the tech on that one.
ORIGINAL: beemer737
Cushion, they charge 3 hours for a three hour job, but the tech can do it in 90 minutes, so in a 8 hour day, a really good wrench could get alloted 10-12-16 hours worth of work, but only need 8 hours to do it in. The tech should see the majority of this extra rate, not the shop ,as it is free to them, makes the customers happy, keeps the tech happy.
Cushion, they charge 3 hours for a three hour job, but the tech can do it in 90 minutes, so in a 8 hour day, a really good wrench could get alloted 10-12-16 hours worth of work, but only need 8 hours to do it in. The tech should see the majority of this extra rate, not the shop ,as it is free to them, makes the customers happy, keeps the tech happy.
#22
07-13-2007, 06:28 PM
Outstanding HDF Member
Join Date: Mar 2007
Location: Columbus, Ga
Posts: 3,290
Likes: 0
Received 0 Likes
on
0 Posts
#23
07-13-2007, 11:49 PM
Road Captain
Thread
Thread Starter
Forum
Replies
Last Post
