Thanks. New bikes are nice, wouldn't say no if you handed me the keys. But I like tinkering and giving toys my own touch. I agree about the forks, blacked out or full chrome look great. I was going to go 12" Yaffe, but saw these Arlen Ness bars and really liked how I have more adjustability, especially with pull back. I find lots of bars have way more then my wrists like. These are 13".

Correct

Thank you. I picked up a set of Vance & hines classic turndowns, they were chrome. Sand blasted them, high temp flat blacked the man tube, and powder coated the tips. These babies are loud, I even put new Fiberglass in them, glad I did. They have a perfect rumble.

On another note, I forgot to mention I painted the bike with rattle cans

Winter project for you
i just powder coated all the covers including rocker boxes. The jugs/heads/crankcase I didn't touch, still factory coating there.

Thanks for for all the compliments guys, really appreciated, lots of time went into the bike.

Thanks, incase anyone wants to know about the lights. The horizontal lights are Ciro3d bag blades, they go Amber sequential when turning. The vertical set are Custom Dynamics 10" Plasma Rods, they go Amber when turning as well.

Thanks, but I was just copying what others have already done. Yep, you can add an '09 up swing arm to your '08. The width is still the same at the bushings at the transmission connection. But just behind that contact point the swing arm fattens out a bit, the new frames allow for that, but the older ones need to narrowed a touch on each side. Not a hard job. I sandblasted mine before making changes, then powder coated after, looks factory
Another thing to note, side covers need a slight trim at the bottom to allow for bigger swing arm. Of course I found this out after I painted them