I've read alot about the Fullsac kit and amseriously considering it. I've read the instructions but they do not mention the O2 sensor which is in the H pipe on my bike.

Does it get relocated and to where. I see that there is a kit for 07 and it's more expensive, so I assume (yeah I know it's dangerous) that the kit for these bikes is different.

Just like to know what I'm getting into before I do it, if possible.

 

The 07 kit has a bung for the o2 sensor, thats why it's more expensive. I went with the 07 kit for my bike even though I was installing a P/C III at the time of the fullsac install with the o2 delete plugs, just in case things didn't workout I could still use the o2 sensors if needed. Piece of cake installation for the fullsac.

 

Just put one on my 07 Ultra, the o2 sensor screws in in the middle of the bend aiming sort of at the starter solenoid. very strait forward install, just follow the instructions and use plenty of WD40.

 

very simple install and it works great. the rear pipe is were the o2 sensor goes