Performance baggers
#1451
#1452
#1453
#1454
The following users liked this post:
SoCalDyna2015 (07-17-2021)
#1455
I have the Galver floating wave disc’s in the front with the Brembo M4 calipers and pads with no problems at all. Important though is not to setup the left and right disc symmetrical. Then you get a harmonic balance that you don’t want. I do not know if this is helping with your problem, but it is worth checking.
#1457
#1458
wow really?? Nice, everywhere I’ve read, I see that I need to upgrade my master which can get pricey. Would you mind sharing where you got those? About to jump on this!
#1459
The following users liked this post:
jesusa.nunez@gmail.com (07-26-2021)
#1460
Slave cylinder decided to crap the bed on my during chain install. Almost back on the road
If you look close under the exhaust pipe you can see the previsions for DIY mid control kit that's on deck.
Looks like I will have to loose my heat shield to make it work but will see when all parts start installing
If you look close under the exhaust pipe you can see the previsions for DIY mid control kit that's on deck.
Looks like I will have to loose my heat shield to make it work but will see when all parts start installing