Ignition switch alignment tool
#1
#2
Believe the answer is "no". The ignition switch changed somewhere around 2014 and a different tool is needed. I know that the tool I have for my previous 2009 Ultra will not fit my 2017 Road Glide Ultra (which should be the same as your RG), so I bought the new tool.
George's Garage has the new tool (659950) for a few dollars less than I paid, though it's still not cheap:
http://www.georges-garage.com/chassis_tools.htm
Note that the older tool George's sells corresponds to the H-D part number shown in the eBay listing above.
George's Garage has the new tool (659950) for a few dollars less than I paid, though it's still not cheap:
http://www.georges-garage.com/chassis_tools.htm
Note that the older tool George's sells corresponds to the H-D part number shown in the eBay listing above.
#4
I've had to use a long, straight screwdriver to do that alignment job a coupla three times...even when I've kept that tool in place during the job! It's just a matter of hit and miss...I've got the George's Garage version, looks similar to that one.
If you've got misalignment, grab you a cuppa, and that screwdriver, and a flashlight, and suss it out...you'll get 'er done...might take a while, but you will! I've done it, like I say, more than once...
If you've got misalignment, grab you a cuppa, and that screwdriver, and a flashlight, and suss it out...you'll get 'er done...might take a while, but you will! I've done it, like I say, more than once...
#5
#7
Trending Topics
#8
#9
#10