I just purchased a Road Zeppelin seat, 52000201 is the part number. I have looked at the connector on the bottom of the seat and also looked at all the connectors under the seat and left side panel and i see nothing the seat connector will fit in. My bike is not a Rushmore model, any ideas? I also bought the accessory cable thats recomended but it want fit anything...Help!!!

 

So you have Part No. 69200722?...under left side panel, there are two connectors at the bottom with rubber plugs in them. The bottom one is for ECM, tuner, etc...the top for the accessory plug.

 

yes, i have that connector...it want fit in either of the plugs on the left side panel

 

Go to the 6 minute mark...light plug to light plug, not black end..let us know how you end up!!!

 

The part number 69200772 that was given to me looks nothing like the one in the video. Apparently Harley mispackaged this part.......Thanks mastergunnera8......i seem to of got another problem tho... washed the bike off this evening and when i went out to look at the connector i noticed the last light on both sides of tourpack was dimly on. i checked the connector and blowed it out with air...little bit of water in it but the lights are still on....hopefully it will dry out

 

​​​​​​​Spray a little WD40 in there...water displacement is exactly the reason this stuff was invented!

 

All is good on the lights now, I will try the WD40 next time. Got the correct part coming for the Road Zeppelin seat so hopefully it will all go smoothly once I get it