Powervision 1 Map for 551 Easy Start cams
#1
Powervision 1 Map for 551 Easy Start cams
Good day all. I just installed a set of these cams in my bike. I have a PV1 that I bought from Fuel Moto. I'm an unable to find a map for these cams. Fuel Moto did supply me with a map for a SE255 set of cams. It's okay but not optimal. I contacted S&S and they no longer supply PV maps. Dynojet does not have any listed on their Web site.
The bike is a 2007 Road King with a 96 inch motor, Screamin Eagle A/C and slip ons.
I'm not going the Dyno route as there isn't one within 500 miles of me.
The bike starts and runs okay but is smells rich to me. I haven't time to ride as I got called away for work. I realize I can auto tune and get it closer. I was just hoping to get a better base map. Thanks.
The bike is a 2007 Road King with a 96 inch motor, Screamin Eagle A/C and slip ons.
I'm not going the Dyno route as there isn't one within 500 miles of me.
The bike starts and runs okay but is smells rich to me. I haven't time to ride as I got called away for work. I realize I can auto tune and get it closer. I was just hoping to get a better base map. Thanks.
#2
Join Date: Jun 2007
Location: SoCal.....I'm only here for the weather
Posts: 2,168
Received 579 Likes
on
305 Posts
I'm running the 551's in my '07 Ultra and started with the same base map as you. I'm still trying to get it dialed in using the Autotune with the stock 02 sensors. I'm having issues with hesitation and partial stalling on standing starts along with very poor running when cold. I've contacted FM and sent them my latest tune but I've not heard back. I certainly don't think I'm running rich. If anything I think I'm lean on low throttle positions.
Thread
Thread Starter
Forum
Replies
Last Post
msr082881
Ignition/Tuner/ECM/Fuel Injection
3
02-20-2015 04:28 PM