+1 on the 14's looking awesome! Did we ever find out if Kpie had to extend cables/wires?

 

Yes. I had the dealer do the swap. I just confirmed with them that they DID install new brake and clutch lines and wire extensions for the TBW, etc. Hope this helps.

 

What did you get charged for the bars / wires and install ?


If you don't mind sharing. I know its not cheap

 

Not positive on the amounts, I had them do it in the deal on the bike. I know the bars were about $400 alone. I would have done them myself but I'm sure I would have fouled something up in the process... thus taking into the dealer anyway....lol.

 

I changed the bars out over the weekend. Stock brake and clutch lines fit fine, they would've worked either way but I removed them from the clip on the neck to give a little extra slack. I did extend the wiring but didn't have to extend the tbw.

 

Very Nice

 

Reapers look nice! Bad A__!

 

How much higher are your hands versus the stock bars? It's hard to tell when they say 14" bars but there's that angle back down from the top.

 

Yardstick can you help me out please with a part number? Have looked at H-D.com under FLHX parts - lights and in the 2016 parts catalog and can't find this option.

 

I'm 5'10 and my hands are just below my shoulders. The bars are about 5-6 inches above the stock bars. The grip height is what wild 1 measures as the rise, not the top of the bar. I went with the reapers because I needed the pullback compared to some of the other bars and also the bar turns have smooth corners inside for wiring.